Phase Dim LED Driver

PHASE DIM LED DRIVER LDR20WPD 20W 300-700MA

GTIN: 4099854612350 Folding box / 1 Show all packages
5-year warranty

PRODUCT DETAILS

Product benefits
  • 5 years guarantee
  • Enables installation with commonly used leading-edge and trailing-edge dimmers
  • High efficiency and reliability
Areas of application
  • Suitable for LED luminaires and LED modules
  • Applicable for luminaires of protection classes I and II
  • For indoor SELV installations
  • Offices, schools
  • Offices, shopping centers, hospitals, restaurants, hotels
Product features
  • Available in 20 W, 30 W, 40 W
  • Dimmable on the leading edge and trailing edge
  • Dimmable from 10…100 %
  • Lifetime up to 50,000 h
  • Type of protection: IP20
  • Operated with less than 60 V: Safety extra-low voltage (SELV)
  • Multiple output current selectable
Electrical data
Nominal wattage 20.00 W
Nominal output power 20 W
Nominal voltage 220…240 V
Nominal output voltage 27…47 V
Input voltage range 198…264 V
Input voltage AC 198…264 V
U-OUT (working voltage) 53 V
Type of current DC
Nominal current 0.16 A
Nominal output current 300 mA; 350 mA; 400 mA; 450 mA; 500 mA; 550 mA; 600 mA; 650 mA; 700 mA
Output current tolerance 5 %
Output ripple current (100 Hz) < 5 %
Mains frequency 50…60 Hz
Total harmonic distortion 25 %
Power factor λ 0.95
ECG efficiency 83 %
Max. ECG no. on circuit breaker 10 A (B) -
Max. ECG no. on circuit breaker 16 A (B) -
Max. ECG no. on circuit breaker 25 A (B) -
Galvanic isolation SELV
Flickering metric (Pst LM) <1
Photometrical data
Flickering metric (Pst LM) <1
Stroboscope effect metric (SVM) <0.4
Dimensions & Weight
Length 116.00 mm
Mounting hole spacing, length 106.0 mm
Width 42.50 mm
Height 28.00 mm
Cable cross-section, input side 0.75…1.5 mm²
Cable cross-section, output side 0.5…1.5 mm²
Prewired Yes
Wire preparation length, input side 7…9 mm
Wire preparation length, output side 7…9 mm
Product weight 92.00 g
Colors & materials
Product color White
Casing material Plastic
Body material Plastic
Temperatures & operating conditions
Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 80 °C
Temperature range in operation -20…+50 °C
Permitted rel. humidity during operation 20…90 %
Additional product data
Encapsulated Yes
Capabilities
Dimmable Yes
Dimming interface Phase Cut
Dimming range 10…100 %
Overheating protection No
Overload protection Yes
Short-circuit protection Yes
Max. cable length to lamp/LED module 1.5 m
Suitable for fixtures with prot. class I; II
Suitable for emergency lighting No
Type of connection, output side 1.5m Flex & Plug (inclusive of driver & output lead)
Certificates & Standards
Standards Acc. to EN 61347-1; Acc. to EN 61347-2-13; Acc. to GB 19510.1; Acc. to GB 19510.14; Acc. to EN 62384; Acc. To EN IEC 55015; Acc. To EN IEC 61000-3-2; Acc. to EN 61000-3-3; Acc. To GB/T 17743; Acc. To GB 17625.1; Acc. to EN 61547
Protection class II
Type of protection IP20
LOGISTICAL DATA
Temperature range at storage -20…+60 °C
PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS
Minimum rate of recycled material in packaging 80 % 1)
Minimum percentage of recycled content in the product 0 % 1)
Product recyclability Mostly recyclable product 1)
Packaging recyclability Mostly recyclable packaging 1)
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage No
1) According to AGEC Decree 2022-748 (French Anti-Waste-Legislation for a Circular Economy)
Product code Packaging unit (Pieces/Unit) Dimensions (length x width x height) Gross weight Volume
4099854612350 Folding box
1
59 mm x 49 mm x 185 mm 114.00 g 0.53 dm³
4099854526114 Shipping box
20
390 mm x 272 mm x 148 mm 2641.00 g 15.70 dm³
User instruction / safety instructions
PHASE DIMMING DRIVER 20W LDR20WPD
Product image: white background, upright
PHASE DIMMING DRIVER 20W
Product line drawing with numbers
PHASE DIMMING DRIVER 20W
EAN AU model number
4099854612350 LDR20WPD