PRODUCT DETAILS

Areas of application
  • General lighting
  • Grocery & Retail
  • Healthcare
  • Industrial areas
  • Loading docks and warehouses
  • Manufacturing facilities
  • Multi-family residential
  • Retail spaces
  • Storage areas
Product features
  • Cold-rolled steel housing
  • UV stabilized, impact-resistant fiberglass reinforced polycarbonate lens
  • Suitable for damp locations
  • UL 924 compliant for emergency lighting safety
  • Available in 120-277V
  • Built-in lithium battery
  • Provides up to 90 min battery run time
Safety advice
  • Failure to follow these instructions and warnings may result in death, serious injury or significant property damage
  • Risk of fire. Lamps are hot. Keep combustible material away from hot parts. Observe lamp manufacturer's warnings, recommendations and instructions
  • Risk of electric shock- never connect to disconnect from or service while equipment is energized.
  • Consult local building code for approved wiring and installation
  • Disconnect AC power before servicing and installation.
  • Do not mount near gas or electric heaters.
  • The use of accessory equipment not recommended by the manufacturer will void product listing and warranty and may cause an unsafe installation.
  • Any service on this equipment should be performed by qualified personnel only
  • Equipment should be mounted in locations and at heights where it will not be subject to tampering by unauthorized personnel.
  • Use caution when servicing batteries.
  • Cap unused wires with enclosed wire nuts or other approved method.
  • Make sure wire terminations are secure, and leads are properly tucked in appropriate wire channels.
  • Initially, battery in this unit may not be fully charged. After electricity is connected, allow for a minimum of 24 hours for battery to charge before relying on emergency lighting
  • Do not use outdoors. Suitable for use in -4°F to 104°F (-20°C to 40°C) damp locations only
  • Do not use this equipment for anything other than its intended use.
Installation Guide
EMERGENCY LIGHT STEEL BODY
Product Family Spec Sheet
EMERGENCY LIGHT STEEL BODY
Other documents / promotion
LEDVANCE Product Launch Flyer August 2026
Electrical data
Nominal Wattage 6.00 W
Nominal voltage 120.00…277.00 V
Power factor ≥0.90
Total Harmonic Distortion < 20 %
Photometrical data
Lumens 720 lm
Efficacy 120 lm/W
Color Temperature/CCT 6500 K
Color Rendering Index (CRI) 80
Dimensions & Weight
Length 13.78 in
Height 3.15 in
Width 10.2 in
Product weight 4.57 lb
Materials & Colors
Luminaire Finish White
Housing color White
Mercury content 0.0 mg
Application & Mounting
Ambient temperature range -20…40 °C
Maximum Operating Temperature 104 °F
Minimum Operating Temperature -4 °F
Dimming No
Mounting Surface
Replaceable light source No
Primary Lamp Type SMD
Lifespan
Average Rated Life (hr) 50000
Certificates & Standards
Certification Listing RoHS; FCC; cULus
Replaceable light source (EPREL) Not replaceable
Additional product data
Ordering Abbreviation EMLVSWH
Abbrev. With Packaging Info. EMLVSWH 4/CS 1/SKU
SKU UPC 0046135676796
Family Brand Name LEDVANCE
General Description EMERGENCY LIGHT VALUE CLASS, STAINLESS STEEL, WHITE
Warranty 5 years
Logistical data
SKU Qty 1
Case Qty 4
Case Length (in) 15.354
Case Width (in) 11.496
Case Depth (in) 12.008
Case Cube (ft) 1.227
Case Weight (lbs) 21.146
SKU UPC 0046135676796
Pallet Qty 120
SKU's/Case 4
SKU's/Pallet 120
Cases/Pallet 30
Product image: white background, diagonal
Emergency Light Stainless Steel
Product image: white background, diagonal, alternative image
Emergency Light Stainless Steel
Product image: white background, horizontal
Emergency Light Stainless Steel
Product image: white background, upright
Emergency Light Stainless Steel
Product image: white background, upright, switched on
Emergency Light Stainless Steel
Product image: white background, with accessory, alternative image
Emergency Light Stainless Steel
Product image: white background, internal view
Emergency Light Stainless Steel