Areas of application

• Indoor low bay
• Bollards
• Post tops

Product features

• Rated for open and enclosed fixtures
• No warm-up time, instant-on with full light output and stable color
• 360° beam angle (or omnidirectional) with Type V distribution
• Up to 135 LPW
• Passive cooling design (higher reliability with no internal fan)
• 80 CRI, R9>0
• Energy savings up to 84 %
• Available in 120-277V
• 2KV surge
• Easy to install, UL type B requires easy ballast bypass

Safety advice

• Verify fixture size before installation to ensure fit.
• Not for use with dimmers.
• Should not be directly exposed to water.
• Please read and comply with all instructions, including the installation manual included inside the packaging before attempting installation.
• All installation, inspection, and maintenance of lighting fixtures should be done with the power to the fixture turned off.
• Lamps should be installed and operated in compliance with the National Electrical Code (NEC), Underwriters Laboratories Inc. (UL) requirements, and all applicable codes and regulations.
• See installation manual for wiring options.
• Ensure lamp holders/sockets are in good operating condition before installation and if any defects are detected, change the lamp holders/sockets.
• Do not make or alter any open holes in an enclosure of wiring or electrical components during installation.