OT FIT 75/220-240/1A6 CS

OPTOTRONIC FIT CS

GTIN: 4052899999565 Unpacked / 1 Show all packages

Download data sheet

Contact sales

Our warranty conditions

PRODUCT DETAILS

Product benefits

Higher quality of light thanks to low output ripple current
High flexibility due to four different output currents
Small housing for flexible luminaire designs
High efficiency

Areas of application

Suitable for downlights, spotlights and LED panels
Suitable for luminaires of protection classes I and II

Product features

Lifetime: up to 50,000 h (temperature at max. t_c)
Cable clamp kit for independent mounting

Electrical data

Nominal wattage	75.00 W
Nominal output power	32.5…77 W
Nominal voltage	220…240 V
Nominal output voltage	27…57 V, 27…42 V ¹⁾
Input voltage AC	198…264 V
U-OUT (working voltage)	70 V
Nominal current	0.37 A
Nominal output current	1200 mA, 1350 mA, 1500 mA, 1650 mA
Inrush current	40 A ²⁾
Output current tolerance	±7,5 %
Output ripple current (100 Hz)	< 5 %
Mains frequency	50/60 Hz
Total harmonic distortion	< 10 % ³⁾
Power factor λ	0.98
ECG efficiency	91 % ⁴⁾
Device power loss	8.6 W ⁵⁾
Max. ECG no. on circuit breaker 10 A (B)	16
Max. ECG no. on circuit breaker 16 A (B)	26
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Galvanic isolation	SELV
Flickering metric (Pst LM)	≤1

¹⁾ At output current 1200/1350 mA / At output current 1500/1650 mA
²⁾ t_width = 200 µs (measured at 50 % I_peak)
³⁾ At full load, 230 V, 50 Hz / see graphs
⁴⁾ At full load and 230 V / At 50 Hz
⁵⁾ At 230 V, Input power 85.5 W max.

Photometrical data

Flickering metric (Pst LM)	≤1
Stroboscope effect metric (SVM)	≤0.4

Dimensions & Weight

Length	103.00 mm
Mounting hole spacing, length	94,0 mm
Width	67.00 mm
Height	29.50 mm
Cable cross-section, input side	0.5…1.5 mm², 0.75…1.5 mm² ¹⁾
Cable cross-section, output side	0.5…1.5 mm², 0.75…1.5 mm² ¹⁾
Wire preparation length, input side	7…8 mm
Wire preparation length, output side	7…8 mm
Product weight	170.00 g

¹⁾ Solid/ Flexible Leads

Colors & materials

Casing material	Plastic
Body material	Plastic

Temperatures & operating conditions

Ambient temperature range	-20…+50 °C ¹⁾
Maximum temperature at tc test point	80 °C
Max.housing temperature in case of fault	110 °C
Permitted rel. humidity during operation	5…85 % ²⁾

¹⁾ At output current 1200/1350/1500 mA / At output current 1650 mA
²⁾ Non-condensing

Lifespan

ECG lifetime

50000 h, 30000 h ¹⁾

¹⁾ T_c = 70°C, with max. 10% failure rate / T_c = 80°C, with max. 10% failure rate

Additional product data

Encapsulated

Capabilities

Dimmable	No
Overheating protection	Automatic reversible
Overload protection	Automatic reversible
Short-circuit protection	Automatic reversible
No-load proof	Yes
Max. cable length to lamp/LED module	2,0 m
Suitable for fixtures with prot. class	I, II
Type of connection, output side	Push terminal

Certificates & Standards

Approval marks – approval	CCC, CE, RCM, ENEC 05
Standards	Acc. to IEC 61347-1, Acc. to IEC 61347-2-13, Acc. to IEC 62384, Acc. to IEC 61000-3-2, Acc. to IEC 61000-3-3, Acc. to IEC 61547, Acc. to CISPR 15
Protection class	II
Type of protection	IP20

LOGISTICAL DATA

Temperature range at storage

-20…80 °C

PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS

Quantity of precious metals	0 mg
Quantity of rare earths	0 mg
Minimum rate of recycled material in packaging	80 % ¹⁾
Minimum percentage of recycled content in the product	0 % ¹⁾
Product recyclability	Mostly recyclable product ¹⁾
Packaging recyclability	Mostly recyclable packaging ¹⁾
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage	No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage	Yes
List of substances of very high concern in concentrations greater than 0.1% in mass percentage	Lead (7439-92-1)