OT 2DIM IP64

OT 110/120…277/1A4 2DIMLT2 P

GTIN: 4052899253438 Unpacked / 1 Show all packages
Our warranty conditions

PRODUCT DETAILS

Product benefits
  • 2DIM functionality in one device (AstroDIM, 0…10 V)
  • High surge protection: up to 6 kV (in protection class I or II)
  • Fast programming without mains voltage
  • High efficiency
  • Great flexibility due to wide operating temperature range of -40…55 °C
  • Protection through double isolation between mains input and LED output
  • IP rating: IP64
Areas of application
  • Street and urban lighting
  • Industry
  • Suitable for luminaires of protection classes I and II
Product features
  • Available with different wattage: 50 W, 100 W, 110 W
  • Input voltage: 120…277 V
  • Available with output current range: up to 1,400 mA
  • Flexible current setting with one additional wire (LEDset2)
  • AstroDIM for autonomous dimming with five independent levels (astro mode)
  • Isolated 0…10 V interface for unidirectional telemanagement systems
  • Constant Lumen Output (CLO)
  • Overtemperature protection with external NTC or LEDset2 interface
Equipment / Accessories
  • OT Programmer hardware for configuration of 2DIM ECGs necessary
  • Programmable via Tuner4TRONIC software
Electrical data
Nominal wattage 110.00 W
Nominal output power 110 W 1)
Nominal voltage 120…277 V
Nominal output voltage 35…85 V
Input voltage AC 108…305 V 2)
U-OUT (working voltage) 120 V
Nominal current 0.54 A 3)
Nominal output current 600…1400 mA
Inrush current 55 A 4)
Output current tolerance ±5 % 5)
Output ripple current (100 Hz) 25 %
Mains frequency 50/60 Hz
Total harmonic distortion 15 % 6)
Power factor λ 0.95 7)
ECG efficiency 90 % 8)
Device power loss 15 W 9)
Max. ECG no. on circuit breaker 10 A (B) 6 10)
Max. ECG no. on circuit breaker 16 A (B) 10 10)
Max. ECG no. on circuit breaker 25 A (B) 16 10)
Surge capability (L/N-Ground) 6 kV 11)
Surge capability (L-N) 6 kV 12)
Galvanic isolation SELV
Flickering metric (Pst LM) ≤1
1) Partial Load 45…110 W / Not dimmed
2) Permitted voltage range
3) At 230 V / 1.06 A for 120 VAC
4) twidth = 230 µs (measured at 50 % Ipeak)
5) Within nominal output current range
6) Max. output power at 230 VAC
7) Minimum/Full load at 230 V/Half load at 230 V
8) At full load, default current and 230 V
9) Maximum
10) Type B
11) EQUI @ 12 Ohm acc. to EN 61547
12) @ 2 Ohm, acc. to EN61547
Photometrical data
Flickering metric (Pst LM) ≤1
Stroboscope effect metric (SVM) ≤0.4
Dimensions & Weight
Length 168.00 mm
Mounting hole spacing, length 152,0 mm
Width 68.00 mm
Height 38.00 mm
Wire preparation length, input side 10 mm
Wire preparation length, output side 10 mm
Product weight 740.00 g
Colors & materials
Casing material Metal
Body material Metal
Temperatures & operating conditions
Ambient temperature range -40…+55 °C 1)
Maximum temperature at tc test point 85 °C 2)
Max.housing temperature in case of fault 120 °C
Permitted rel. humidity during operation 5…85 % 3)
1) Ta(max) = 40°C for input voltage 120 VAC / Ta(max) = 55°C for input voltage 277 VAC
2) Maximum at the Tc-point
3) Non condensing, absolute humidity: 36g/m³
Lifespan
ECG lifetime 80000 h 1)
1) At Tcase = 75°C at Tc point / 10% failure rate
Additional product data
Encapsulated Yes
Product remark No on/off switching of lamps possible via 0...10 V interface
Capabilities
Dimmable Yes
Dimming interface 2DIM, 1…10 V, AstroDIM
Dimming range 30…100 %
Overheating protection Yes
Overload protection Automatic reversible
Short-circuit protection Yes
No-load proof Yes
Max. cable length to lamp/LED module 10 m
Suitable for fixtures with prot. class I, II
Type of connection, output side Wires
Certificates & Standards
Approval marks – approval CE, ENEC 15, UR, CQC
Standards Acc. to EN 61347-1, Acc. to EN 61347-2-13, Acc. to EN 62384, Acc. to EN 55015:2006 + A1:2007 + A2:2009, Acc. to EN 61547, Acc. to FCC 47 part 15 class A, Acc. to IEC 61000-3-2, Acc. to IEC 61000-3-3, UL-8750
Protection class I/II
Type of protection IP64
LOGISTICAL DATA
Temperature range at storage -25…80 °C
PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS
Quantity of precious metals 0 mg
Quantity of rare earths 0 mg
Minimum rate of recycled material in packaging 80 % 1)
Minimum percentage of recycled content in the product 0 % 1)
Product recyclability Mostly recyclable product 1)
Packaging recyclability Mostly recyclable packaging 1)
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage Yes
List of substances of very high concern in concentrations greater than 0.1% in mass percentage Lead (7439-92-1)
1) According to AGEC Decree 2022-748 (French Anti-Waste-Legislation for a Circular Economy)
Product code Packaging unit (Pieces/Unit) Dimensions (length x width x height) Gross weight Volume
4052899253438 Unpacked
1
740.00 g
4052899253445 Shipping box
20
358 mm x 188 mm x 220 mm 15346.00 g 14.81 dm³
User instruction / safety instructions
615708_Instruction sheet OT 110 1A4 2DIMLT2 P
Declarations of conformity
OT 2DIMLT2P CE 3676115 211119
Declarations of conformity
725871_Certificate of analysis OT100
Declarations of conformity
647099_ENEC Certificate OT 110 2DIMLT2 P
Declarations of conformity
646953_CB ENEC Information
Declarations of conformity
651655_UL Conformity OT 100_110/120_277/xxx 2DIMLT2 P
Declarations of conformity
545682_EC-Conformity OT 50/120-277/xxx 2DIMLT2 P
Certificates
OT 110 2DIMLT2P ENEC 01230 080120
Certificates
664161_CB Zertifikat OT 110 1A4 2DIMLT2 P
Certificates
OT 110 2DIMLT2P CB DK91178UL 080120
Certificates
617034_CCC Certificate OT 110/120-277/1A4 2DIMLT2 P
Product image: white background, diagonal
607308_OT 110/120-277/1A4 2DIMLT2 P
Product image: white background, horizontal
607309_OT 110/120-277/1A4 2DIMLT2 P
Product line drawing with letters
607288_OT 100/120-277/800 2DIMLT2 P
Product line drawing, front, no dimensions
607290_OT 100/120-277/800 2DIMLT2 P
EAN EFO number ELDAS number
4052899253438 6608508 919391090