SST CLAS A 75 10.5 W/2700K E27

Product benefits
  • Low energy consumption
  • High color consistency thanks to narrow binning
  • Easy replacement of classic lamps thanks to compact design
  • Instant 100 % light, no warm-up time
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Rated wattage 10.50 W
Nominal wattage 10.50 W
Nominal voltage 220…240 V
Max. lamp no. on circuit break. 10 A (B) 70
Max. lamp no. on circuit break. 16 A (B) 120
Operating frequency 50…60 Hz
Power factor λ > 0.70
Claimed equiv. conventional lamp power 75 W

Photometrical data

Rated luminous flux 1055 lm
Lumen main.fact.at end of nom.life time 0.70
Light color (designation) Warm White
Color temperature 2700 K
Luminous flux 1055 lm
Color rendering index Ra ≥80
Standard deviation of color matching ≤6 sdcm
Nominal luminous flux 1055 lm
Rated color temperature 2700 K
Color rendering index Ra ≥80

Light technical data

Warm-up time (60 %) < 1.00 s
Starting time < 0.5 s

Dimensions & weight

Overall length 110.0 mm
Diameter 60.0 mm
Outer bulb A60
Length 110.0 mm

Temperatures & operating conditions

Ambient temperature range -20…+40 °C
Maximum temperature at tc test point 100 °C

Lifespan

Nominal lamp life time 25000 h
Rated lamp life time 25000 h
Number of switching cycles 100000
Lumen maintenance at end of service life 0.70

Additional product data

Base (standard designation) E27
Mercury-free Yes
Show WEEE picto Yes
Product remark All technical parameters apply to the entire lamp/Due to the complex production process for light-emitting diodes, the typical values shown for the technical LED parameters are purely statistical values that do not necessarily match the actual technical parameters of each individual product, which can vary from the typical value/LED lamps contain several electronic components. Under unfavourable conditions these can lead to acoustic noise. In case of resonance even low noise can cause audible effect. Possible factors influencing this are the installation, the design of the lamp holder and the luminaire (acoustic resonance effect) as well as the dimmer or the transformer (harmonics or electronic resonance)
Mercury content 0.0 mg

Capabilities

Dimmable Yes

Certificates & standards

Energy efficiency class A+
Energy consumption 11 kWh/1000h

Country-specific categorizations

Order reference LEDSCLA75D 10,5
Product line drawing
Product line drawing
344046_CLASSIC A 60 ADVANCED FROSTED PLANET EPS (363.1 KB)
Packaging image, frontal
Packaging image, frontal
LED SST CLA 75 DIM 11.0W 827 FR E27 MiCh TIF (6.6 MB)
Packaging image, spacial
Packaging image, spacial
LED SST CLA 75 DIM 11.0W 827 FR E27 MiCh TIF (9.7 MB)
Energy label, vertical
Energy label, vertical
EL-p-4058075433809_en PDF (29.0 KB)
Product Datasheet
Product Datasheet
LEDSCLA75D 10,5W827 230VFR 10X1 OSRAM PDF (210.9 KB)
Product code Packaging unit
Piece / unit		 Gross weight Volume
4058075433809 FS
1		 60mm x 60mm x 145mm 59.00g 0.52dm³
4058075433816 VS
10		 322mm x 134mm x 120mm 752.00g 5.18dm³
Product benefits
  • Low energy consumption
  • High color consistency thanks to narrow binning
  • Easy replacement of classic lamps thanks to compact design
  • Instant 100 % light, no warm-up time
Areas of application
  • Domestic applications
  • General illumination
  • Outdoor applications only in suitable luminaires
Product features
  • LED alternative to conventional lamps
  • Good quality of light; color rendering index Ra: ≥ 80; constant chromaticity
  • High color consistency: < 6 SDCM
  • Dimmable (with many common dimmers, see also www.ledvance.com/dim)
  • Mercury-free lamps

References / Links
For dimming conformity see www.ledvance.com/dim
For further products and actual information concerning LED lamps see www.ledvance.com/ledlamps
For Guarantee see www.ledvance.com/guarantee