OTi DALI 50/220…240/1A4 Box

Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Very high efficiency
  • Protection of the system thanks to thermal management and Smart Control
  • High-quality dimming of 1…100 % by amplitude dimming
  • Driver with cable clamps, including resistors for typical output current set
  • Easy and fast output current setting via NFC
Versatile scope of application due to OSRAM DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 0/50/60 Hz
Input voltage AC
198…264 V
Total harmonic distortion
< 10 %
Power factor λ > 0.95
ECG efficiency
91 %
Device power loss 7.5 W
Inrush current
30 A
Max. ECG no. on circuit breaker 10 A (B) 12
Max. ECG no. on circuit breaker 16 A (B) 20
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
15…54 V
U-OUT (working voltage) 60 V
Nominal output current
600…1400 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 2 %
Nominal output power
55 W
Galvanic isolation SELV
Galvanic isolation primary/secondary 3.75 kV

Dimensions & weight

Length 145.0 mm
Width 75.0 mm
Height 25.0 mm
Mounting hole spacing, length 99.0 mm
Mounting hole spacing, width 64.0 mm
Cable cross-section, input side
0.2…1.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Product weight 209.00 g
Wire preparation length, input side 8.0…9.0 mm
Wire preparation length, output side 8.0…9.0 mm

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I / II
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval ENEC 10 / VDE / EMC / EL / CE / DALI-2
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4062172058476 FS
1
386.00g
4062172058483 VS
10
188mm x 163mm x 181mm 2450.00g 5.55dm³
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Very high efficiency
  • Protection of the system thanks to thermal management and Smart Control
  • High-quality dimming of 1…100 % by amplitude dimming
  • Driver with cable clamps, including resistors for typical output current set
  • Easy and fast output current setting via NFC
Versatile scope of application due to OSRAM DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to EN 55015:2007+A1:2007/CDN
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h
  • Type of protection: IP20