P CLAS B 25 2.5 W/2700K B22d

Product benefits
  • Lamps with innovative LED "filament" technology
  • Design, dimensions, luminous flux comparable to an incandescent or halogen lamp
  • No UV and near-IR radiation in the light beam
  • Instant 100 % light, no warm-up time
  • Can be easily fitted instead of ordinary light bulbs
  • Lower thermal output (compared with the standard reference product)

Product details

Electrical data

Rated wattage 2.50 W
Nominal wattage 2.50 W
Nominal voltage 220…240 V
Max. lamp no. on circuit break. 10 A (B) 263
Max. lamp no. on circuit break. 16 A (B) 421
Operating frequency 50…60 Hz
Power factor λ > 0.50
Claimed equiv. conventional lamp power 25 W

Photometrical data

Nominal luminous flux 250 lm
Rated luminous flux 250 lm
Lumen main.fact.at end of nom.life time 0.70
Light color (designation) Warm White
Color temperature 2700 K
Luminous flux 250 lm
Color rendering index Ra ≥80
Standard deviation of color matching ≤6 sdcm
Rated color temperature 2700 K

Light technical data

Warm-up time (60 %) < 0.50 s
Starting time < 0.5 s

Dimensions & weight

Overall length 91.0 mm
Diameter 35.0 mm
Outer bulb B35
Length 91.0 mm

Temperatures & operating conditions

Ambient temperature range -20…+40 °C
Maximum temperature at tc test point 61 °C

Lifespan

Nominal lamp life time 15000 h
Rated lamp life time 15000 h
Number of switching cycles 100000
Lumen maintenance at end of service life 0.70

Additional product data

Base (standard designation) B22d
Mercury content 0.0 mg
Mercury-free Yes
Show WEEE picto Yes
Product remark All technical parameters apply to the entire lamp/Due to the complex production process for light-emitting diodes, the typical values shown for the technical LED parameters are purely statistical values that do not necessarily match the actual technical parameters of each individual product, which can vary from the typical value/LED lamps contain several electronic components. Under unfavourable conditions these can lead to acoustic noise. In case of resonance even low noise can cause audible effect. Possible factors influencing this are the installation, the design of the lamp holder and the luminaire (acoustic resonance effect) as well as the dimmer or the transformer (harmonics or electronic resonance)

Capabilities

Dimmable No

Certificates & standards

Energy efficiency class A++
Energy consumption 3 kWh/1000h

Country-specific categorizations

Order reference LEDPCLB25 2,5W/
Product code Packaging unit
Piece / unit
Gross weight Volume
4058075287686 FS
1
39mm x 39mm x 109mm 33.00g 0.17dm³
4058075287693 VS
10
205mm x 87mm x 123mm 277.00g 2.19dm³
EAN SEG number STK number ELDAS number
4058075287686 8294855 4731219 941803340
Product benefits
  • Lamps with innovative LED "filament" technology
  • Design, dimensions, luminous flux comparable to an incandescent or halogen lamp
  • No UV and near-IR radiation in the light beam
  • Instant 100 % light, no warm-up time
  • Can be easily fitted instead of ordinary light bulbs
  • Lower thermal output (compared with the standard reference product)
Areas of application
  • Perfect for decorative installations
  • Domestic applications
  • General illumination
  • Outdoor use in outdoor luminaires only (minimum IP65)
Product features
  • Professional LED lamps for line voltage
  • Beam angle: up to 300°
  • Not dimmable
  • Base: E14
  • Lifetime: up to 15,000 h
  • Lamp made of glass
  • Good quality of light; color rendering index Ra: ≥ 80; constant chromaticity