OTi DALI 60/220…240/550 D LT2 L

Product family benefits
  • Fully programmable via software (DALI Interface)
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Very low standby power consumption: < 0.15 W *
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Input voltage DC 176…276 V
Total harmonic distortion < 10 %
Power factor λ > 0.95
ECG efficiency
≤93 %
Device power loss
5.0 W
Power loss in stand-by mode <0.25 W
Protective conductor current <0.5 mA
Inrush current
25 A
Max. ECG no. on circuit breaker 10 A (B) 15
Max. ECG no. on circuit breaker 16 A (B) 24
Max. ECG no. on circuit breaker 25 A (B) 37
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
54…240 V
U-OUT (working voltage) < 250 V
Nominal output current
120…550 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 1 %
Nominal output power 6.4…60 W
Galvanic isolation Non isolated

Dimensions & weight

Length 280.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 270.0 mm
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Product weight 205.00 g
Wire preparation length, input side 8.5…9.5 mm
Wire preparation length, output side 8.5…9.5 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -25…+60 °C
Maximum temperature at tc test point 75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range
1…100 %
Dimming method Full analogue dimming
Constant lumen function Programmable
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval CE / EL / ENEC 10 / VDE-EMC / CCC / RCM
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection IP20

Logistical data

Temperature range at storage -25…85 °C
Product line drawing
Product line drawing
726271_OTi DALI 90220-2401A0 LT2 L EPS (381.8 KB)
Product line drawing
Product line drawing
542117_OTi DALI 60220-240550 D LT2 L EPS (366.7 KB)
User instruction
User instruction
OPTOTRONIC® LED Power Supply PDF (3.0 MB)
Product Datasheet
Product Datasheet
730297_OTi DALI 60220-240550 D LT2 L PDF (534.0 KB)
Product Datasheet
Product Datasheet
OTi DALI 60220-240550 D LT2 L PDF (606.8 KB)
Product Datasheet
Product Datasheet
601162_Data sheet OTi DALI 60 PDF (566.0 KB)
Certificates
Certificates
730563_VDE Certificate PDF (642.4 KB)
Certificates
Certificates
VDE ENEC Certificate 40038085 PDF (633.4 KB)
Certificates
Certificates
539639_CD Test Approval PDF (962.3 KB)
Certificates
Certificates
OTI DALI OT FIT D LT2 L CB DE1 58970 040320 PDF (1.6 MB)
Declarations of conformity
Declarations of conformity
727247_EC OTi PDF (455.9 KB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3667898 PDF (581.4 KB)
Declarations of conformity
Declarations of conformity
EATON(CEAG)-Conformity declaration AM00138_OTiDALI60_220_240_550_D_LT2_L PDF (1.2 MB)
Declarations of conformity
Declarations of conformity
INOTEC- Conformity declaration AM00138_OTiDALI60_220_240_550_D_LT2_L PDF (1.7 MB)
Declarations of conformity
Declarations of conformity
EATON(CEAG)-Conformity declaration AN00950 OTI DALI 60220-240550 D LT2 L PDF (222.5 KB)
Declarations of conformity
Declarations of conformity
INOTEC-Conformity declaration AN00950 OTI DALI 60220-240550 D LT2 L PDF (279.5 KB)
CAD data 3-dim
CAD data 3-dim
505454_CAD data OTi DALI 60220-240550 D LT2 L ZIP (482.2 KB)
CAD data PDF
CAD data PDF
505460_CAD data OTi DALI 60220-240550 D LT2 L PDF (371.3 KB)
Advertisements
Advertisements
538835_Poster OPTOTRONIC LED drivers (EN) PDF (3.0 MB)
Product code Packaging unit
Piece / unit		 Gross weight Volume
4052899494206 UNV
1
4052899494213 VS
20		 305mm x 161mm x 104mm 4277.00g 5.11dm³
EAN ELDAS number
4052899494206 919491820
Product family benefits
  • Fully programmable via software (DALI Interface)
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Very low standby power consumption: < 0.15 W *
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
Areas of application
  • Linear lighting for office, education, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 80 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Available with output current range: up to 2,100 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • DALI-2 certified (Part -101,-102 and -207)