| Nominal wattage | 10.00 W |
| Nominal output power | 10 W 1) |
| Nominal voltage | 220…240 V |
| Nominal output voltage | 2.5…45 V 2) |
| Input voltage AC | 198…264 V 3) |
| Input voltage DC | 176…276 V |
| U-OUT (working voltage) | 60 V |
| Nominal output current | 150…700 mA 4) |
| Inrush current | < 5 A 5) |
| Output current tolerance | +/- 3 % |
| Output ripple current (100 Hz) | < 2 % 6) |
| Mains frequency | 0/50/60 Hz |
| Total harmonic distortion | 15 % 7) |
| Power factor λ | 0.98 8) |
| Device power loss | 3,5 W |
| Max. ECG no. on circuit breaker 10 A (B) | 80 |
| Max. ECG no. on circuit breaker 16 A (B) | 130 |
| Max. ECG no. on circuit breaker 25 A (B) | - |
| Surge capability (L/N-Ground) | 2 kV |
| Surge capability (L-N) | 1 kV |
| Flickering metric (Pst LM) | ≤1 |
| Flickering metric (Pst LM) | ≤1 |
| Stroboscope effect metric (SVM) | ≤0.4 |
| Length | 124.00 mm |
| Mounting hole spacing, length | 115,0 mm |
| Width | 31.00 mm |
| Height | 21.00 mm |
| Cable cross-section, input side | 0.2…1.5 mm² 1) |
| Cable cross-section, output side | 0.2…1.5 mm² 1) |
| Wire preparation length, input side | 8.0…9.1 mm |
| Wire preparation length, output side | 8.0…9.1 mm |
| Product weight | 58.00 g |
| Casing material | Plastic |
| Body material | Plastic |
| Ambient temperature range | -20…+50 °C |
| Maximum temperature at tc test point | 75 °C 1) |
| Max.housing temperature in case of fault | 110 °C |
| Permitted rel. humidity during operation | 5…85 % 2) |
| ECG lifetime | 50000 h, 100000 h 1) |
| Dimmable | Yes |
| Dimming interface | DALI-2 |
| Dimming range | 1…100 % 1) |
| Overheating protection | Automatic reversible |
| Overload protection | Automatic reversible |
| Short-circuit protection | Automatic reversible |
| No-load proof | Yes |
| Max. cable length to lamp/LED module | 2,0 m |
| Suitable for fixtures with prot. class | I, II |
| Suitable for emergency lighting | Yes |
| Type of connection, output side | Push terminal |
| Approval marks – approval | ENEC 10, VDE, EMC, EL, CE, DALI-2, CCC |
| Standards | Acc. to EN 61347-1, Acc. to EN 61347-2-13, Acc. to EN 55015, Acc. to EN 61547, Acc. to EN 61000-3-2, Acc. to EN 62384, Acc. to EN 62386, Acc. to IEC 62386-101:Ed2, Acc. to IEC 62386-102:Ed2, Acc. to IEC 62386-207:Ed1 |
| Protection class | II |
| Type of protection | IP20 |
| Energy efficiency class | A1 |
| Temperature range at storage | -40…+85 °C |
| Networked standby power for CLS | ≤0.15 W |
| Quantity of precious metals | 0 mg |
| Quantity of rare earths | 0 mg |
| Minimum rate of recycled material in packaging | 80 % 1) |
| Minimum percentage of recycled content in the product | 0 % 1) |
| Product recyclability | Mostly recyclable product 1) |
| Packaging recyclability | Mostly recyclable packaging 1) |
| List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage | No |
| Contains substances of very high concern in concentrations greater than 0.1% by mass percentage | No |
| Product code | Packaging unit (Pieces/Unit) | Dimensions (length x width x height) | Gross weight | Volume |
|---|---|---|---|---|
| 4062172250269 | Unpacked 1 |
62.00 g | ||
| 4062172250276 | Shipping box 20 |
260 mm x 116 mm x 83 mm | 1.25 g | 2.50 dm³ |
| EAN | ELDAS number |
|---|---|
| 4062172250269 | 919490320 |