OTi DALI 10/220…240/700 NFCOPTOTRONIC© Intelligent

OPTOTRONIC© Intelligent – DALI NFC S

OTi DALI 10/220…240/700 NFC

GTIN: 4062172143899 Unpacked / 1 Show all packages

Download data sheet

Contact sales

Our warranty conditions

PRODUCT DETAILS

Product benefits

Versatile DALI window driver due to flexible output characteristic
Locking and unlocking of luminaire/driver data
Easy and fast output current setting via NFC
Very high efficiency
High-quality dimming of 1…100 % by amplitude dimming
DALI-2 certified incl. Parts 251, 252, 253

Areas of application

Suitable for downlights, spotlights and LED panels
Suitable for use in luminaires with flexible current setting
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II

Product features

Supply voltage: 220…240 V
Line frequency: 0 Hz, 50…60 Hz
Line voltage: 198…264 V
According to EN 61347-1, 61347-2-13, 62384
RI suppression according to EN 55015:2007+A1:2007/CDN
Immunity according to EN 61547
Type of protection: IP20

Electrical data

Nominal wattage	10.00 W
Nominal output power	10 W ¹⁾
Nominal voltage	220…240 V
Nominal output voltage	2.5…45 V ²⁾
Input voltage AC	198…264 V ³⁾
Input voltage DC	176…276 V
U-OUT (working voltage)	60 V
Nominal output current	150…700 mA ⁴⁾
Inrush current	< 5 A ⁵⁾
Output current tolerance	±3 %
Output ripple current (100 Hz)	< 2 % ⁶⁾
Mains frequency	0/50/60 Hz
Total harmonic distortion	15 % ⁷⁾
Power factor λ	> 0.98 ⁸⁾
ECG efficiency	82 % ⁹⁾
Device power loss	3,5 W
Max. ECG no. on circuit breaker 10 A (B)	80
Max. ECG no. on circuit breaker 16 A (B)	130
Max. ECG no. on circuit breaker 25 A (B)	-
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Power loss in stand-by mode	≤0.15 W
Flickering metric (Pst LM)	≤1

¹⁾ Partial load 1.5...10 W
²⁾ Maximum 60 V
³⁾ Permitted voltage range
⁴⁾ ±3%
⁵⁾ t_width = 100 µs (measured at 50 % I_peak)
⁶⁾ Ripple average at 100 Hz %
⁷⁾ At full load, 220…240 V, 50 Hz / At half load, 220…240 V, 50 Hz
⁸⁾ At Pmax, 220…240 V, 50 Hz / At 50% Pmax, 220…240 V, 50 Hz
⁹⁾ Typical / At full load and 230 V

Photometrical data

Flickering metric (Pst LM)	≤1
Stroboscope effect metric (SVM)	≤0.4

Dimensions & Weight

Length	124.00 mm
Mounting hole spacing, length	115,0 mm
Width	31.00 mm
Height	21.00 mm
Cable cross-section, input side	0.2…1.5 mm² ¹⁾
Cable cross-section, output side	0.2…1.5 mm² ¹⁾
Wire preparation length, input side	8.0…9.1 mm
Wire preparation length, output side	8.0…9.1 mm
Product weight	58.00 g

¹⁾ Solid or flexible leads

Colors & materials

Casing material	Plastic
Body material	Plastic

Temperatures & operating conditions

Ambient temperature range	-20…+50 °C
Maximum temperature at tc test point	75 °C ¹⁾
Max.housing temperature in case of fault	110 °C
Permitted rel. humidity during operation	5…85 % ²⁾

¹⁾ Maximum at the Tc-point
²⁾ Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h, 100000 h ¹⁾

¹⁾ T_c = 75°C, 0.2% / 1,000 h failure rate / T_c = 65°C, 0.1% / 1,000 h failure rate

Additional product data

Encapsulated

Capabilities

Dimmable	Yes
Dimming interface	DALI-2
Dimming range	1…100 % ¹⁾
Overheating protection	Automatic reversible
Overload protection	Automatic reversible
Short-circuit protection	Automatic reversible
No-load proof	Yes
Max. cable length to lamp/LED module	2,0 m
Suitable for fixtures with prot. class	I, II
Suitable for emergency lighting	Yes
Type of connection, output side	Push terminal

¹⁾ For maximum nominal output current

Certificates & Standards

Approval marks – approval	ENEC 10, VDE, EMC, EL, CE, DALI-2, CCC
Standards	Acc. to EN 61347-1, Acc. to EN 61347-2-13, Acc. to EN 55015, Acc. to EN 61547, Acc. to EN 61000-3-2, Acc. to EN 62384, Acc. to EN 62386, Acc. to IEC 62386-101:Ed2, Acc. to IEC 62386-102:Ed2, Acc. to IEC 62386-207:Ed1
Protection class	II
Type of protection	IP20

LOGISTICAL DATA

Temperature range at storage

-40…+85 °C

Energy labelling regulation data acc EU 2019/2015

Networked standby power for CLS

≤0.15 W

PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS

Quantity of precious metals	0 mg
Quantity of rare earths	0 mg
Minimum rate of recycled material in packaging	80 % ¹⁾
Minimum percentage of recycled content in the product	0 % ¹⁾
Product recyclability	Mostly recyclable product ¹⁾
Packaging recyclability	Mostly recyclable packaging ¹⁾
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage	No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage	Yes
List of substances of very high concern in concentrations greater than 0.1% in mass percentage	Lead (7439-92-1)