DR DALI-PFM -60/220-240/1A4

LED DRIVER DALI PERFORMANCE

GTIN: 4058075421929 Folding box / 1 Show all packages

Download data sheet

Contact sales

Our warranty conditions

PRODUCT DETAILS

Product benefits

Low flickering enables high light quality as well as good visual comfort
Push DIM application for easy control
High-quality dimming of 1…100 %
Suitable for emergency lighting
5 years guarantee

Areas of application

Suitable for indoor SELV installations
Suitable for use in emergency lighting systems (DC capable)
Installation via Cable Clamp Kit possible (depending on version of product)
Linear lighting for office, education, storage areas and retail

Product features

1 channel DALI-2 certified LED driver
Supply voltage: 220…240 V
Operated with Safety extra-low voltage (SELV): < 60 V
Available with output current range: up to 1,400 mA
Type of installation: independent and built-in

References / Links

For Guarantee see www.ledvance.com/guarantee

Electrical data

Nominal output power	60 W ¹⁾
Nominal voltage	220…240 V
Nominal output voltage	9…52 V ²⁾
Input voltage AC	198…264 V ³⁾
Input voltage DC	196…245 V
U-OUT (working voltage)	60 V
Type of current	DC
Nominal current	385 mA
Nominal output current	1400 mA ⁴⁾
Inrush current	30 A
Output current tolerance	±5 %
Output ripple current (100 Hz)	+/- 5 %
Mains frequency	0/50/60 Hz
Total harmonic distortion	< 10 % ⁵⁾
Power factor λ	0.95 ⁶⁾
ECG efficiency	88 % ⁷⁾
Device power loss	13.2 W ⁸⁾
Max. ECG no. on circuit breaker 10 A (B)	13
Max. ECG no. on circuit breaker 16 A (B)	21
Max. ECG no. on circuit breaker 25 A (B)	34
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Galvanic isolation	SELV
Operating frequency	0/50/60 Hz
Power loss in stand-by mode	< 0.5 W

¹⁾ Partial load 6.3…60.2 W
²⁾ Within rated power
³⁾ Permitted voltage range
⁴⁾ ±5%
⁵⁾ At full load, 220…240 V, 50 Hz
⁶⁾ Full load at 230 V
⁷⁾ At full load and 230 V
⁸⁾ At maximum LED load of 73 W

Dimensions & Weight

Length	100.00 mm
Mounting hole spacing, length	100 mm
Width	76.00 mm
Height	32.00 mm
Cable cross-section, input side	0,5…1,0 mm²
Cable cross-section, output side	0,5…1,0 mm²
Prewired	No
Wire preparation length, input side	6…7 mm
Wire preparation length, output side	6…7 mm
Product weight	327.00 g

Colors & materials

Product color	White
Casing material	Plastic
Body material	Plastic

Temperatures & operating conditions

Ambient temperature range	-20…+50 °C
Maximum temperature at tc test point	90 °C
Max.housing temperature in case of fault	110 °C
Temperature range in operation	-20…+50 °C
Permitted rel. humidity during operation	5…85 % ¹⁾

¹⁾ Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h ¹⁾

¹⁾ At maximum T_c / 10% failure rate

Additional product data

Encapsulated

Capabilities

Dimmable	Yes
Dimming interface	DALI-2
Dimming range	1…100 %
Overheating protection	Yes
Overload protection	Yes
Short-circuit protection	Yes
No-load proof	Yes
Max. cable length to lamp/LED module	2,0 m
Suitable for fixtures with prot. class	I, II
Suitable for emergency lighting	Yes
Type of connection, output side	Push terminal

Certificates & Standards

Approval marks – approval	CE, CB, ENEC
Standards	Acc. to EN 61347-1, Acc. to EN 61347-2-13, Acc. to EN 55015, Acc. to EN 61547, Acc. to EN 61000-3-2, Acc. to EN 62384
Protection class	I
Type of protection	IP00

LOGISTICAL DATA

Temperature range at storage

-40…+85 °C

PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS

Quantity of precious metals	0 mg
Quantity of rare earths	0 mg
Minimum rate of recycled material in packaging	80 % ¹⁾
Minimum percentage of recycled content in the product	0 % ¹⁾
Product recyclability	Mostly recyclable product ¹⁾
Packaging recyclability	Mostly recyclable packaging ¹⁾
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage	No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage	Yes
List of substances of very high concern in concentrations greater than 0.1% in mass percentage	Lead (7439-92-1)