OTi DALI 15/220…240/1A0 LT2OPTOTRONIC® Intelligent

OPTOTRONIC Intelligent – DALI LT2

OTi DALI 15/220…240/1A0 LT2

GTIN: 4052899324879 Unpacked / 1 Show all packages

Download data sheet

Contact sales

Our warranty conditions

PRODUCT DETAILS

Product benefits

Versatile DALI window driver due to flexible output characteristic
Very high efficiency
Protection of the system thanks to thermal management and Smart Control
High-quality dimming of 1…100 % by amplitude dimming

Versatile scope of application due to OSRAM DALI Technology:

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Areas of application

Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II
Suitable for downlights, spotlights and LED panels
Installation via Cable Clamp Kit possible (depending on version of product)

Product features

Supply voltage: 220…240 V
Line frequency: 0 Hz | 50 Hz | 60 Hz
Line voltage: 198…264 V
Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
RI suppression: to EN 55015/CISPR 15
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime: up to 100,000 h
Type of protection: IP20
Independent connection via through-looping (except OTi DALI 15)

Electrical data

Nominal wattage	18.00 W
Nominal output power	18 W ¹⁾
Nominal voltage	220…240 V
Nominal output voltage	7,5…54 V ²⁾
Input voltage AC	198…264 V ³⁾
Input voltage DC	176…276 V
U-OUT (working voltage)	60 V
Nominal current	0.12 A
Nominal output current	150…1050 mA ⁴⁾
Inrush current	5 A
Output current tolerance	±3 %
Output ripple current (100 Hz)	< 2 % ⁵⁾
Mains frequency	50/60 Hz
Total harmonic distortion	< 10 % ⁶⁾
Power factor λ	0.95
ECG efficiency	88 % ⁷⁾
Device power loss	2,4 W
Max. ECG no. on circuit breaker 10 A (B)	82
Max. ECG no. on circuit breaker 16 A (B)	130
Max. ECG no. on circuit breaker 25 A (B)	-
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Galvanic isolation	SELV
Power loss in stand-by mode	≤0,27 W

¹⁾ Partial load 3…18 W
²⁾ Maximum 60 V
³⁾ Permitted voltage range
⁴⁾ ±5%
⁵⁾ Ripple average at 100 Hz %
⁶⁾ At full load, 220…240 V, 50 Hz / see graphs
⁷⁾ Typical / At full load and 230 V

Dimensions & Weight

Length	95.00 mm
Width	53.00 mm
Height	30.00 mm
Cable cross-section, input side	0.2…1.5 mm² ¹⁾
Cable cross-section, output side	0.2…1.5 mm² ¹⁾
Wire preparation length, input side	8.0…9.0 mm
Wire preparation length, output side	8.0…9.0 mm
Product weight	100.00 g

¹⁾ Solid or flexible leads

Colors & materials

Product color	White
Casing material	Plastic
Body material	Plastic

Temperatures & operating conditions

Ambient temperature range	-20…+50 °C
Maximum temperature at tc test point	75 °C ¹⁾
Max.housing temperature in case of fault	100 °C
Permitted rel. humidity during operation	5…85 % ²⁾

¹⁾ Maximum at the Tc-point
²⁾ Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h, 100000 h ¹⁾

¹⁾ T_c = 75°C, 0.2% / 1,000 h failure rate / T_c = 65°C, 0.1% / 1,000 h failure rate

Additional product data

Encapsulated

Capabilities

Dimmable	Yes
Dimming interface	DALI, Touch DIM, Touch DIM Sensor
Dimming range	1…100 % ¹⁾
Overheating protection	Automatic reversible
Overload protection	Automatic reversible
Short-circuit protection	Automatic reversible
No-load proof	Yes
Max. cable length to lamp/LED module	2,0 m
Suitable for fixtures with prot. class	I, II
Suitable for emergency lighting	Yes
Type of connection, output side	Push terminal

¹⁾ For maximum nominal output current

Certificates & Standards

Approval marks – approval	ENEC 10, VDE, EMC, EL, CE
Standards	Acc. to EN 61347-1, Acc. to EN 61347-2-13, Acc. to EN 55015, Acc. to EN 61547, Acc. to EN 61000-3-2, Acc. to EN 62384
Protection class	II
Type of protection	IP20

LOGISTICAL DATA

Temperature range at storage

-25…85 °C

PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS

Quantity of precious metals	0 mg
Quantity of rare earths	0 mg
Minimum rate of recycled material in packaging	80 % ¹⁾
Minimum percentage of recycled content in the product	0 % ¹⁾
Product recyclability	Mostly recyclable product ¹⁾
Packaging recyclability	Mostly recyclable packaging ¹⁾
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage	No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage	Yes
List of substances of very high concern in concentrations greater than 0.1% in mass percentage	Lead (7439-92-1)

¹⁾ According to AGEC Decree 2022-748 (French Anti-Waste-Legislation for a Circular Economy)

Product code	Packaging unit (Pieces/Unit)	Dimensions (length x width x height)	Gross weight	Volume
4052899324879	Unpacked 1		100.00 g
4052899324886	Shipping box 20	284 mm x 207 mm x 90 mm	2270.00 g	5.29 dm³

Product image	Product name	EAN
	OT CABLE CLAMP F-STYLE	4052899325555

User instruction / safety instructions
OPTOTRONIC LED Power Supply

PDF (2.94 MB)

Declarations of conformity
EU Declaration of Conformity 3365628

PDF (616.01 KB)

Certificates
OTI DALI 15 LT2 INOTEC AM34566 210720

PDF (350.9 KB)

Certificates
730563_VDE Certificate

PDF (668.98 KB)

Certificates
664763_CB-Certificate- OTi DALI 15

PDF (1.52 MB)

Certificates
OTI DALI 15 LT2 EATON AM34566 210720

PDF (155.65 KB)

Certificates
INOTEC-Conformity declaration AB32361 OTi DALI 15/220-240/1A0 LT2

PDF (128.17 KB)

Certificates
EATON(CEAG)-Conformity declaration AB32361 OTi DALI 15/220-240/1A0 LT2

PDF (55.07 KB)

Certificates
VDE ENEC Certificate 40038447

PDF (721.67 KB)

PRODUCT DATASHEET
OTi DALI 15/ 220-240/1A0 LT2

PDF (493.5 KB)

Product image: white background, diagonal
OTi DALI 15/220-240/1A0 LT2

TIF (5.4 MB)

Product image: white background, horizontal
OTi DALI 15/220-240/1A0 LT2

TIF (3.04 MB)

Product image: white background, upright
607616_OTi DALI 15 without cable clamp

TIF (38.89 MB)

Product line drawing with letters
654796_OTe 10/13/18/25 PC + OTi DALI 15 LT2

SVG (30.68 KB)

Product line drawing with numbers
OTI DALI15/220-240/1A0LT2 NFC UNV1 OSRAM

SVG (25.78 KB)

Product line drawing, front, no dimensions
654797_OTe 10/13/18/25 PC + OTi DALI 15 LT2

SVG (25.33 KB)

Product line drawing, front, no dimensions
OTI DALI15/220-240/1A0LT2 NFC UNV1 OSRAM

SVG (20.77 KB)