OT FIT 50/220…240/250 D LOPTOTRONIC® FIT D L

GTIN: 4052899222571 Unpacked / 1 Show all packages

Contact sales

Small housing design
Fixed current
Lifetime: up to 100,000 h (temperature at T_c = 65 °C, max. 10 % failure rate)
High quality of light thanks to low output ripple current
High efficiency
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Linear lighting for office, education, industry, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Suitable for luminaires of protection class I

Nominal wattage	54.00 W
Nominal output power	13.5…54 W ¹⁾
Nominal voltage	220…240 V
Nominal output voltage	54…216 V
Input voltage AC	198…264 V ²⁾
Input voltage DC	176…276 V
U-OUT (working voltage)	< 250 V
Nominal current	0.27 A
Nominal output current	250 mA ³⁾
Output current tolerance	±10 %
Output ripple current (100 Hz)	< 10 % ⁴⁾
Mains frequency	0/50/60 Hz
Total harmonic distortion	< 20 %
Power factor λ	> 0.95 ⁵⁾
ECG efficiency	> 90 % ⁶⁾
Device power loss	5 W ⁷⁾
Max. ECG no. on circuit breaker 10 A (B)	35
Max. ECG no. on circuit breaker 16 A (B)	56
Max. ECG no. on circuit breaker 25 A (B)	-
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Galvanic isolation	Non isolated
Flickering metric (Pst LM)	≤1

¹⁾ Partial load 14…54 W
²⁾ Permitted voltage range
³⁾ ±10%
⁴⁾ up to 5% @ 120V
⁵⁾ Full load at 230 V
⁶⁾ At full load and 230 V
⁷⁾ Maximum

Flickering metric (Pst LM)	≤1
Stroboscope effect metric (SVM)	≤0.4

Length	210.00 mm
Mounting hole spacing, length	200,0 mm
Width	30.00 mm
Height	21.00 mm
Cable cross-section, input side	0.5…1.5 mm² ¹⁾
Cable cross-section, output side	0.5…1.5 mm² ¹⁾
Wire preparation length, input side	8,5…9,5 mm
Wire preparation length, output side	8,5…9,5 mm
Product weight	125.00 g

¹⁾ Solid or flexible leads

Ambient temperature range	-15…+50 °C
Maximum temperature at tc test point	75 °C ¹⁾
Max.housing temperature in case of fault	110 °C
Permitted rel. humidity during operation	5…85 % ²⁾

¹⁾ Maximum at the Tc-point
²⁾ Maximum 56 days/year at 85 %

ECG lifetime

50000 h, 100000 h ¹⁾

¹⁾ At maximum T_c = 75°C / 10% failure rate / At T_c = 65°C / 10% failure rate

Encapsulated

Dimmable	No
Overheating protection	Automatic reversible
Overload protection	Automatic reversible
Short-circuit protection	Automatic reversible
No-load proof	Yes
Max. cable length to lamp/LED module	2,0 m
Suitable for fixtures with prot. class	I
Suitable for emergency lighting	Yes
Type of connection, output side	Push terminal

Approval marks – approval	CE, EL, VDE-EMC, ENEC 10, CCC, RCM
Standards	Acc. to EN 61347-1, Acc. to EN 61347-2-13, Acc. to EN 55015, Acc. to EN 61547, Acc. to EN 61000-3-2, Acc. to EN 62384, Acc. to EN 62386
Protection class	I
Type of protection	IP20

Temperature range at storage

-25…85 °C

Quantity of precious metals	0 mg
Quantity of rare earths	0 mg
Minimum rate of recycled material in packaging	80 % ¹⁾
Minimum percentage of recycled content in the product	0 % ¹⁾
Product recyclability	Mostly recyclable product ¹⁾
Packaging recyclability	Mostly recyclable packaging ¹⁾
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage	No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage	Additional info can be provided per individual request
List of substances of very high concern in concentrations greater than 0.1% in mass percentage