HALOTRONIC-COMPACT – HTM, HTN

HTN 75/230…240 I

GTIN: 4008321073037 Unpacked / 1 Show all packages
Our warranty conditions

PRODUCT DETAILS

Product benefits
  • Very low power loss thanks to high efficacy
  • Strain relief suitable for different cable types (HTM)
  • Suitable for space-critical installation thanks to compact functional design
  • Extremely compact transformer for highly space-critical installation conditions (HTN)
  • Protective operation throughout the entire partial-load range for long lamp life
Areas of application
  • Effect and accent lighting
  • Living rooms
  • Object lighting
  • Conference rooms
  • Restaurants
  • Recessed and surface-mounted furniture luminaires
  • Shop lighting
  • Event rooms
Product features
  • Line frequency: 50…60 Hz
  • RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Safety: to EN 61347
  • Short-circuit protection, overload protection, overtemperature protection: electronically reversible
  • Electrical isolation between the primary side and the secondary side
  • Dimmable on the leading edge (without HTN) and trailing edge
Electrical data
Nominal wattage 79.00 W
Nominal voltage 230…240 V
Nominal output voltage 11.5 V, 11.7 V 1)
Input voltage range 230…240 V
Input voltage AC 207…254 V
Inrush current 0.37 A 2)
Mains frequency 50/60 Hz 3)
Power factor λ 0.95 4)
ECG efficiency 95 % 5)
Device power loss 4 W 2)
Max. ECG no. on circuit breaker 10 A (B) 37
Max. ECG no. on circuit breaker 16 A (B) 59
Operating frequency 50 kHz
1) 75 W / 20 W
2) Maximum
3) Approximately
4) Minimum
5) At full load
Dimensions & Weight
Length 104.00 mm
Mounting hole spacing, length 98,0 mm
Width 33.00 mm
Height 22.00 mm
Cable cross-section, input side 1.5 mm²
Cable cross-section, output side 1.5 mm²
Wire preparation length, input side 10 mm, 6,0 mm 1)
Wire preparation length, output side 10 mm, 6,0 mm 1)
Product weight 68.00 g
1) Cable sheath / Wire
Colors & materials
Product color Grey
Casing material Plastic
Body material Plastic
Temperatures & operating conditions
Ambient temperature range 0…+50 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation 5…85 % 1)
1) Maximum 56 days/year at 85 %
Additional product data
Encapsulated No
Capabilities
Dimmable Yes
Dimming range 0…100 %
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2,0 m
Suitable for fixtures with prot. class II
Type of connection, output side Screw terminal
Certificates & Standards
Approval marks – approval VDE, VDE-EMC, E1 approval, EAC
Standards Acc. to DIN VDE 0875/CISPR 15/EN 55015, Acc. to EN 61547, Acc. to EN 61000-3-2, Acc. to EN 61047, Acc. to EN 61347, Acc. to EN 55015
Protection class II
Type of protection IP20
LOGISTICAL DATA
Temperature range at storage -40…+85 °C
PRODUCT SHEET RELATING TO ENVIRONMENTAL QUALITIES AND CHARACTERISTICS
Quantity of precious metals 0 mg
Quantity of rare earths 0 mg
Minimum rate of recycled material in packaging 80 % 1)
Minimum percentage of recycled content in the product 0 % 1)
Product recyclability Mostly recyclable product 1)
Packaging recyclability Mostly recyclable packaging 1)
List of dangerous substances contained in the product in concentrations greater than 0.1% in mass percentage No
Contains substances of very high concern in concentrations greater than 0.1% by mass percentage Yes
List of substances of very high concern in concentrations greater than 0.1% in mass percentage Lead (7439-92-1)
1) According to AGEC Decree 2022-748 (French Anti-Waste-Legislation for a Circular Economy)
Product code Packaging unit (Pieces/Unit) Dimensions (length x width x height) Gross weight Volume
4008321073037 Unpacked
1
70.00 g
4008321073044 Shipping box
20
235 mm x 75 mm x 179 mm 1692.00 g 3.15 dm³
User instruction / safety instructions
334738_HALOTRONIC – Manual
User instruction / safety instructions
334136_Technical guide - HALOTRONIC for low-voltage halogen lamps
User instruction / safety instructions
590733_EAC - HTL / HTM / HTN
Declarations of conformity
HALTORONIC CE 3674444 210120
Declarations of conformity
710835_EC-DOC Halotronic
Certificates
334964_ENEC-Marks approval
Certificates
504178_EAC HT family
Certificates
334962_EMC-Marks approval
Certificates
HALOTRONIC EMC 134590 080720
Certificates
VDE ENEC Certificate 40024665
Certificates
EAEC N RU D-DE.MYu62.B.01275 20 26.03.2020-25.03.2025
PRODUCT DATASHEET
321701_ATI HTN 75/230-240 I (GB)
Product image: white background, diagonal
721516_HTN 75/230-240V I
Product image: white background, horizontal
721645_HTN 75/230-240V I
Product line drawing with letters
48860_HTN 75/230-240 I
Product line drawing with numbers
511970_HTN 75/230-240 I
CAD data 3D PDF
313417_98(104)x33x22 9900005
EAN SEG number STK number EFO number ELDAS number
4008321073037 5280325 4030201 6659800 919491900