Professional
Country

QUICKTRONIC DIM T8

Choose your product version

Overview QUICKTRONIC DIM T8

Product description Ambient temperature range Input voltage AC Nominal voltage Mains frequency Input voltage DC
QT 1X18 DIM -20…+60°C 198…264V 220…240V 50…60Hz 154…276V
QT 1X36 DIM -20…+60°C 198…264V 220…240V 50…60Hz 154…276V
QT 1X58 DIM -20…+60°C 198…264V 220…240V 50…60Hz 154…276V
QT 2X18 DIM -20…+60°C 198…264V 220…240V 50…60Hz 154…276V
QT 2X36 DIM -20…+60°C 198…264V 220…240V 50…60Hz 154…276V
QT 2X58 DIM -20…+60°C 198…264V 220…240V 50…60Hz 154…276V
 

QT 1X18 DIM

Product family benefits
  • Same luminous flux with direct and alternating current
  • Perfect lamp start for applications with motion sensors
  • Dimming of amalgam lamps without flickering or reduced lifespan
  • Very high energy efficiency due to cut-off technology
  • Automatic restart after lamp replacement
  • ECGs comply with MINERGIE standard due to very low standby consumption

Product details

Nominal current 0.08 A
Nominal wattage + Power loss 18.90 W
Luminous flux at 35 °C 1350 lm
Number of lighting outlets 1
ECG_1.1 Ambient temperature for lifespan 40 °C
ECG_1.2 Ambient temperature for lifespan 50 °C
ECG_1.3 Ambient temperature for lifespan 60 °C
ECG_2.1 Tc point temperature for lifespa 50 °C
ECG_2.2 Tc point temperature for lifespa 60 °C
ECG_2.3 Tc point temperature for lifespa 70 °C
ECG_3.1 Temperature dependent lifespan 100000 h
ECG_3.2 Temperature dependent lifespan 100000 h
ECG_3.3 Temperature dependent lifespan 100000 h
Nominal current 0.08 A
Nominal wattage + Power loss 18.90 W
Luminous flux at 35 °C 1350 lm
Number of lighting outlets 1
ECG_1.1 Ambient temperature for lifespan 40 °C
ECG_1.2 Ambient temperature for lifespan 50 °C
ECG_1.3 Ambient temperature for lifespan 60 °C
ECG_2.1 Tc point temperature for lifespa 50 °C
ECG_2.2 Tc point temperature for lifespa 60 °C
ECG_2.3 Tc point temperature for lifespa 70 °C
ECG_3.1 Temperature dependent lifespan 100000 h
ECG_3.2 Temperature dependent lifespan 100000 h
ECG_3.3 Temperature dependent lifespan 100000 h

Electrical data

Input voltage AC 198…264 V
Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage DC 154…276 V
Operating frequency 44…120 kHz
Max. ECG no. on circuit breaker 10 A (B)
25
Max. ECG no. on circuit breaker 16 A (B)
41
Inrush current 17 A

Light technical data

Starting time 0.6 s

Dimensions & weight

Length 360.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 350.0 mm
Product weight 237.00 g
Wire preparation length, input side
8.0…9.0 mm
Wire preparation length, output side
8.0…9.0 mm

Temperatures & operating conditions

Ambient temperature range -20…+60 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
100000 h

Capabilities

Dimming interface 1…10 V
Dimming range
1…100 %
Dimmable Yes
Overload protection Yes
Overheating protection Yes
Suitable for fixtures with prot. class I
End of lamp life safety shutdown EOL T.2

Certificates & standards

Approval marks – approval VDE / VDE-EMC / EAC / CCC
Standards Acc. to EN 55015; EN 55022/Acc. to EN 61547/Acc. to IEC 61000-3-2/EN 61000-3-2
EEI – Energy Label A1 BAT
Protection class I
Type of protection IP20
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4008321645647 UNV
1
237.00g
4008321645654 VS
20
385mm x 160mm x 100mm 4911.00g 6.16dm³
EAN SEG number STK number EFO number ELDAS number
4008321645647 7980724 4030280 3351149 919485800
Product family benefits
  • Same luminous flux with direct and alternating current
  • Perfect lamp start for applications with motion sensors
  • Dimming of amalgam lamps without flickering or reduced lifespan
  • Very high energy efficiency due to cut-off technology
  • Automatic restart after lamp replacement
  • ECGs comply with MINERGIE standard due to very low standby consumption
Areas of application
  • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100
  • Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
  • Industry
  • Open-plan offices, corridors and storage rooms
  • Public buildings
  • Suitable for luminaires of protection class I
Product family features
  • Control via 1…10 V interface
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Dimming range: 1…100 % luminous flux
  • Lamp start: within 0.6 s
  • Lifetime: > 100,000 h (for T = 65 °C at Tc)
  • Automatic shutdown of defective lamps and at end of life (EoL T.2)
  • Energy Efficiency Index EEI: A1 BAT
  • Power boost for stable lamp operation
  • Overtemperature protection: Thermal management at high tc temperatures
  • Safety: to EN 61347-2-3