Product description | Length | Width | Height | Product weight | Prewired |
---|---|---|---|---|---|
OT FIT 75/220 240/550 D NFC L | 280.0mm | 30.0mm | 21.0mm | 180.00g | |
OT FIT 35/220 240/350 D NFC L | 280.0mm | 30.0mm | 21.0mm | 180.00g |
Nominal voltage | 220 240 V |
Mains frequency | 50 60 Hz |
Input voltage AC | 198 264 V |
Power factor λ | > 0.95 |
ECG efficiency | up to 94 % |
Device power loss | 7.0 W |
Inrush current | 41 A |
Max. ECG no. on circuit breaker 10 A (B) | 16 |
Max. ECG no. on circuit breaker 16 A (B) | 26 |
Max. ECG no. on circuit breaker 25 A (B) | - |
Surge capability (L/N-Ground) | 2 kV |
Surge capability (L-N) | 1 kV |
Nominal output voltage | 54 216 V |
Nominal output current |
125
550 mA
|
Nominal output power | 10 75 W |
Length | 280.0 mm |
Width | 30.0 mm |
Height | 21.0 mm |
Mounting hole spacing, length | 270.0 mm |
Cable cross-section, input side | 0.5 1.5 mm² |
Cable cross-section, output side | 0.5 1.5 mm² |
Product weight | 180.00 g |
Wire preparation length, input side | 8.0 9.0 mm |
Ambient temperature range | -25 +50 °C |
Maximum temperature at tc test point | 75 °C |
Max.housing temperature in case of fault | 110 °C |
Permitted rel. humidity during operation |
5
85 %
|
ECG lifetime |
50000 / 100000 h
|
Encapsulated | No |
Dimmable | No |
Overheating protection | Automatic reversible |
Overload protection | Automatic reversible |
Short-circuit protection | Automatic reversible |
No-load proof | Yes |
Max. cable length to lamp/LED module | 2.0 m |
Suitable for fixtures with prot. class | I |
Approval marks – approval | CE / EL / ENEC 10 / VDE-EMC / CCC / RCM |
Standards | Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547 |
Type of protection | IP20 |
Temperature range at storage | -40 +85 °C |
Product code | Packaging unit Piece / unit |
Gross weight | Volume | |
---|---|---|---|---|
4052899990180 | UNV 1 |
215.00g | ||
4052899990197 | VS 20 |
305mm x 161mm x 104mm | 3777.00g | 5.11dm³ |