Professional
Country

OPTOTRONIC FIT D L

Choose your product version

Overview OPTOTRONIC FIT D L

Product description Length Width Height Product weight Prewired
OT FIT 30/220…240/125 D L 210.0mm 30.0mm 21.0mm 125.00g
OT FIT 50/220…240/250 D L 210.0mm 30.0mm 21.0mm 125.00g
OT FIT 50/220…240/350 D L 210.0mm 30.0mm 21.0mm 125.00g
OT FIT 50/220…240/300 D L 210.0mm 30.0mm 21.0mm 125.00g
 

OT FIT 30/220…240/125 D L

Product family benefits
  • Small housing design
  • Fixed current
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High quality of light thanks to low output ripple current
  • High efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Power factor λ > 0.95
ECG efficiency
>90 %
Device power loss
3.0 W
Max. ECG no. on circuit breaker 10 A (B) 35
Max. ECG no. on circuit breaker 16 A (B) 56
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage 54…216 V
Nominal output current
125 mA
Nominal output power
6.8…27 W
Galvanic isolation primary/secondary -

Dimensions & weight

Length 210.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 200.0 mm
Mounting length 200.0 mm
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Product weight 125.00 g
Wire preparation length, input side 8.5…9.5 mm

Temperatures & operating conditions

Ambient temperature range -15…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable No
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I

Certificates & standards

Approval marks – approval CE / EL / VDE-EMC / ENEC 10 / CCC / RCM
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection IP20

Logistical data

Temperature range at storage -25…85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4052899222557 UNV
1
125.00g
4052899222564 VS
20
234mm x 161mm x 101mm 2665.00g 3.81dm³
Product family benefits
  • Small housing design
  • Fixed current
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High quality of light thanks to low output ripple current
  • High efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 50 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 350 mA
  • Non-isolated drivers