Professional
Country

OPTOTRONIC FIT CS L G2

Choose your product version

35/220…240/700 CS L G2

35/220…240/700 CS L G2
55/220…240/1A0 CS L G2

55/220…240/1A0 CS L G2
75/220…240/1A4 CS L G2

75/220…240/1A4 CS L G2
Product family: important data at a glance

Overview OPTOTRONIC FIT CS L G2

Product description Length Width Height Product weight Prewired
OT FIT 35/220…240/700 CS L G2 280.0mm 30.0mm 21.0mm 205.00g
OT FIT 55/220…240/1A0 CS L G2 280.0mm 30.0mm 21.0mm 217.00g
OT FIT 75/220…240/1A4 CS L G2 360.0mm 30.0mm 21.0mm 290.00g
Family data sheet
 

OT FIT 35/220…240/700 CS L G2

Product family benefits
  • Flexible current setting (DIPswitch – 4 currents)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High efficiency
  • High quality of light thanks to low output ripple current
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Power factor λ 0.98
ECG efficiency ≤86 %
Device power loss 5.8 W
Inrush current 16 A
Max. ECG no. on circuit breaker 10 A (B) 21
Max. ECG no. on circuit breaker 16 A (B) 34
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage 27…51 V
Nominal output current 500 / 600 / 650 / 700 mA
Nominal output power 13.5…35.7 W
Galvanic isolation primary/secondary -

Dimensions & weight

Length 280.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 270.0 mm
Cable cross-section, input side 0.5…1.5 mm²
Cable cross-section, output side 0.5…1.5 mm²
Product weight 205.00 g
Wire preparation length, input side 8.5…9.5 mm

Temperatures & operating conditions

Ambient temperature range -25…+50 °C
Maximum temperature at tc test point 80 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable No
Overheating protection Automatic reversible
Overload protection Non-reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I

Certificates & standards

Approval marks – approval CE / EL / ENEC 10 / VDE-EMC / CCC / RCM
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547
Type of protection IP20

Logistical data

Temperature range at storage -25…85 °C
Product line drawing
Product line drawing
OT FIT 55220-2401A0 CS L G2 UNV1 OSRAM EPS (383.2 KB)
User instruction
User instruction
OT FIT 35 55 75 220-240 D LT2 L PDF (2.6 MB)
Product Datasheet
Product Datasheet
OT FIT 35220–240700 CS L G2 PDF (445.8 KB)
Certificates
Certificates
VDE EMC Certificate 40038482 PDF (331.8 KB)
Certificates
Certificates
VDE ENEC Certificate 40046756 PDF (614.7 KB)
Certificates
Certificates
VDE EMC Certificate 40046714 PDF (655.7 KB)
Certificates
Certificates
INOTEC Certificate OT FIT 35700 CS L G2 PDF (313.5 KB)
Certificates
Certificates
INOTEC Certificate OT FIT 35700 CS L G2 appendix PDF (89.2 KB)
Declarations of conformity
Declarations of conformity
711957_Declaration of Conformity OT FIT CS L PDF (715.6 KB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3666934 PDF (585.9 KB)
Declarations of conformity
Declarations of conformity
INOTEC- Conformity declaration AM04351_OT_FIT_35_220-240_700_CS_L_EL PDF (1.7 MB)
Advertisements
Advertisements
538835_Poster OPTOTRONIC LED drivers (EN) PDF (3.0 MB)
Product code Packaging unit
Piece / unit		 Dimensions in h x w x l Gross weight Volume
4052899522534 UNV
1		 215.00g
4052899522541 VS
20		 303mm x 159mm x 101mm 4419.00g 4.87dm³
Product family benefits
  • Flexible current setting (DIPswitch – 4 currents)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High efficiency
  • High quality of light thanks to low output ripple current
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 75 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 1,400 mA
  • SELV system