Professional
Country

OPTOTRONIC Intelligent Tunable White

Choose your product version

Overview OPTOTRONIC Intelligent Tunable White

Product description Length Width Height Product weight Prewired
OTi DALI 75/220…240/700 D NFC TW L 360.0mm 30.0mm 21.0mm 260.00g
OTi DALI 35/220…240/400 D NFC TW L 360.0mm 30.0mm 21.0mm 235.00g
 

OTi DALI 75/220…240/700 D NFC TW L

Product family benefits
  • Control of standard white or Tunable White light acc. DALI device type 8 (DT8)*
  • TouchDIM Tunable White integrated for use without additional LMS
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V
Input voltage DC 176…276 V
Total harmonic distortion < 10 %
Power factor λ > 0.95
ECG efficiency up to 91 %
Device power loss 6.0 W
Power loss in stand-by mode <0.2 W
Inrush current 23 A
Max. ECG no. on circuit breaker 10 A (B) 13
Max. ECG no. on circuit breaker 16 A (B) 19
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage 50…240 V
U-OUT (working voltage) < 250 V
Nominal output current 150…700 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 1 %
Nominal output power 8.1…75 W
Galvanic isolation Non isolated
Galvanic isolation primary/secondary -

Dimensions & weight

Length 360.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 350.0 mm
Cable cross-section, input side 0.5…1.5 mm²
Cable cross-section, output side 0.5…1.5 mm²
Product weight 260.00 g
Wire preparation length, input side 8.5…9.5 mm
Wire preparation length, output side 8.5…9.5 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -25…+50 °C
Maximum temperature at tc test point 75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Capabilities

Dimmable Yes
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 1…100 %
Dimming method DALI / TouchDIM / TouchDIM Sensor
Constant lumen function Yes
Overheating protection Yes
Overload protection Yes
Short-circuit protection Yes
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I
Suitable for emergency lighting Yes

Certificates & standards

Approval marks – approval CE / EL / VDE-ENEC / VDE-EMC / CCC / RCM
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4052899990326 UNV
1
4052899990333 VS
20
385mm x 160mm x 100mm 5371.00g 6.16dm³
Product family benefits
  • Control of standard white or Tunable White light acc. DALI device type 8 (DT8)*
  • TouchDIM Tunable White integrated for use without additional LMS
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
Areas of application
  • For Tunable White as well as for 2-channel use (e.g. direct/indirect lighting)
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
  • Perfect system match with PrevaLED Linear Tunable White
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 75 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Usable as DT6 (2-channel) or DT8 (Tunable White) driver*
  • Available with output current range: up to 700 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • Non-isolated drivers