Professional
Country

OPTOTRONIC Intelligent Industry

Choose your product version

100/220…240/700 D NFC IND L

100/220…240/700 D NFC IND L
150/220…240/1A0 D NFC IND L

150/220…240/1A0 D NFC IND L
Product family: important data at a glance

Overview OPTOTRONIC Intelligent Industry

Product description Length Width Height Product weight Prewired
OTi DALI 100/220…240/700 D NFC IND L 360.0mm 30.0mm 21.0mm 260.00g
OTi DALI 150/220…240/1A0 D NFC IND L 425.0mm 30.0mm 21.0mm 306.00g
Family data sheet
 

OTi DALI 100/220…240/700 D NFC IND L

Product family benefits
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • High light quality: 1…100% amplitude dimming and <1% output ripple current
  • Wide operating temperature range: -40…+65 °C
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Integrated inrush current limiter
  • Very high efficiency (up to 96%)
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 0…60 Hz
Input voltage AC 198…264 V
Input voltage DC 176…276 V
Total harmonic distortion < 8 %
Power factor λ > 0.98
ECG efficiency up to 94 %
Device power loss - W
Power loss in stand-by mode <0.2 W
Inrush current 5 A
Max. ECG no. on circuit breaker 10 A (B) 23
Max. ECG no. on circuit breaker 16 A (B) 36
Surge capability (L/N-Ground) 4 kV
Surge capability (L-N) 4 kV
Nominal output voltage 64…300 V
U-OUT (working voltage) < 310 V
Nominal output current 200…700 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 1 %
Nominal output power 28…100 W
Galvanic isolation Non isolated

Dimensions & weight

Length 360.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 350.0 mm
Cable cross-section, input side 0.5…1.5 mm²
Cable cross-section, output side 0.5…1.5 mm²
Product weight 260.00 g
Wire preparation length, input side 8.0…9.0 mm
Wire preparation length, output side 8.0…9.0 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -40…+65 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range 1…100 %
Dimming method DALI / TouchDIM / TouchDIM Sensor
Constant lumen function Yes
Overheating protection Automatic reversible
Overload protection Non-reversible
Short-circuit protection Yes
No-load proof Yes
Max. cable length to lamp/LED module 5.0 m
Suitable for fixtures with prot. class I
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval CE / EL / ENEC 10 / VDE-EMC / CCC / RCM
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product line drawing
Product line drawing
OTI DALI 100220-240700 D NFC IND L EPS (408.4 KB)
Product line drawing
Product line drawing
OTi DALI 100220-240700 D NFC IND L EPS (384.2 KB)
Product line drawing - technical
Product line drawing - technical
OTi DALI 100220-240700 D NFC IND L EPS (372.9 KB)
User instruction
User instruction
OPTOTRONIC LED Power Supply PDF (2.5 MB)
Product Datasheet
Product Datasheet
Product datasheet OTI DALI 100 IND PDF (410.1 KB)
Certificates
Certificates
730563_VDE Certificate PDF (642.4 KB)
Certificates
Certificates
VDE ENEC Certificate 40038085 PDF (633.4 KB)
Certificates
Certificates
VDE EMC Certificate 40044675 (EN) PDF (625.8 KB)
Certificates
Certificates
OT EMC 40050085 200220 PDF (259.0 KB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3633294 PDF (590.5 KB)
Declarations of conformity
Declarations of conformity
EATON(CEAG) Conformity declaration  AM07661_OTi_DALI_100_220-240_700_D_NFC_IND_L PDF (1.3 MB)
Declarations of conformity
Declarations of conformity
INOTEC Conformity declaration AM07661_OTi_DALI_100_220-240_700_D_NFC_IND_L PDF (1.6 MB)
CAD data
CAD data
OTI DALI 100 D NFC IND L STEP 090120 ZIP (1.7 MB)
CAD Data 2-dim
CAD Data 2-dim
OTI DALI 100 D NFC IND L CAD2PDF 090120 ZIP (335.1 KB)
CAD data 3-dim
CAD data 3-dim
OTI DALI 100 D NFC IND L CAD3PDF 090120 ZIP (2.0 MB)
Advertisements
Advertisements
538835_Poster OPTOTRONIC LED drivers (EN) PDF (3.0 MB)
Product code Packaging unit
Piece / unit		 Dimensions in h x w x l Gross weight Volume
4052899559516 UNV
1		 213.00g
4052899559523 VS
20		 385mm x 160mm x 100mm 5371.00g 6.16dm³
EAN ELDAS number
4052899559516 919492040
Product family benefits
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • High light quality: 1…100% amplitude dimming and <1% output ripple current
  • Wide operating temperature range: -40…+65 °C
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Integrated inrush current limiter
  • Very high efficiency (up to 96%)
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
Areas of application
  • Linear lighting solutions for industry, storage areas and retail applications
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 150 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 1,000 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • Non-isolated drivers
  • DALI-2 certified (Part -101,-102 and -207)

This website uses cookies...
Read more

This website uses cookies to offer you certain services and to enhance your user experience. By continuing to use our website you consent to the usage of cookies as described in our Cookie Policy .
Less

This website uses cookies to offer you certain services and to enhance your user experience. By continuing to use our website you consent to the usage of cookies as described in our Cookie Policy .