Product description	Length	Width	Height	Product weight
OTi DALI 35/220…240/700 LT2 L G2	360.0mm	30.0mm	21.0mm	240.00g
OTi DALI 50/220…240/1A4 LT2 L G2	360.0mm	30.0mm	21.0mm	240.00g
OTi DALI 35/220…240/700 LT2 L	360.0mm	30.0mm	21.0mm	275.00g
OTi DALI 80/220…240/1A6 LT2 L	360.0mm	30.0mm	21.0mm	285.00g
OTi DALI 80/220…240/2A1 LT2 L	360.0mm	30.0mm	21.0mm	285.00g
OTi DALI 90/220…240/1A0 LT2 L	280.0mm	30.0mm	21.0mm	205.00g
OTi DALI 90/220…240/700 D LT2 L	280.0mm	30.0mm	21.0mm	205.00g
OTi DALI 60/220…240/550 D LT2 L	280.0mm	30.0mm	21.0mm	205.00g
OTi DALI 35/220-240/400 D LT2 L	280.0mm	30.0mm	21.0mm	205.00g

OTi DALI 35/220…240/700 LT2 L

Product family benefits

Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at T_c = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W *
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Versatile scope of application due to OSRAM DALI Technology:

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance

View all details

Product Data sheet

Go to Predecessor product data

Family data sheet

Product details

Technical Data

Electrical data

Nominal voltage	220…240 V
Mains frequency	50…60 Hz
Input voltage AC	198…264 V
Input voltage DC	176…276 V
Total harmonic distortion	< 11 %
Power factor λ	> 0.95
ECG efficiency	≧90 %
Device power loss	4.4 W
Power loss in stand-by mode	<0.5 W
Protective conductor current	<2.0 mA
Inrush current	32 A
Max. ECG no. on circuit breaker 10 A (B)	18
Max. ECG no. on circuit breaker 16 A (B)	30
Max. ECG no. on circuit breaker 25 A (B)	-
Surge capability (L/N-Ground)	2 kV
Surge capability (L-N)	1 kV
Nominal output voltage	20…54 V
U-OUT (working voltage)	60 V
Nominal output current	200…700 mA
Output current tolerance	±2 %
Output ripple current (100 Hz)	< 1 %
Nominal output power	35 W
Galvanic isolation	SELV
Galvanic isolation primary/secondary	3.75 kV

Dimensions & weight

Length	360.0 mm
Width	30.0 mm
Height	21.0 mm
Mounting hole spacing, length	350.0 mm
Cable cross-section, input side	0.5…1.5 mm²
Cable cross-section, output side	0.5…1.5 mm²
Product weight	275.00 g
Wire preparation length, input side	8.5…9.5 mm
Wire preparation length, output side	8.5…9.5 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range	-25…+60 °C
Maximum temperature at tc test point	75 °C
Max.housing temperature in case of fault	110 °C
Permitted rel. humidity during operation	5…85 %

Lifespan

ECG lifetime

50000 / 100000 h

Additional product data

Encapsulated

Capabilities

Dimmable	Yes
Dimming interface	DALI / Touch DIM / Touch DIM Sensor
Dimming range	1…100 %
Dimming method	Amplitude Modulation / Pulse Width Modulation
Constant lumen function	Programmable
Overheating protection	Automatic reversible
Overload protection	Automatic reversible
Short-circuit protection	Automatic reversible
No-load proof	Yes
Max. cable length to lamp/LED module	2.0 m
Suitable for fixtures with prot. class	I
Suitable for emergency lighting	Yes
Type of connection, output side	Push terminal

Certificates & standards

Approval marks – approval	ENEC 10 / VDE / EMC / EL / CE
Standards	Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Type of protection	IP20

Logistical data

Temperature range at storage

-25…75 °C

Graphics and application images

Product line drawing
502044_OTI DALI 80220-2401A6 LT2 L EPS (366.5 KB)

Downloads

Product Datasheet
545691_Datasheet_OTi DALI 35_220-240_700 LT2 L PDF (302.3 KB)

Certificates
VDE ENEC Certificate 40038447 PDF (705.5 KB)

Certificates
VDE EMC Certificate 40038827 PDF (621.0 KB)

Declarations of conformity
EU Declaration of Conformity 3366462 PDF (574.3 KB)

CAD data 3-dim
546351_OTi-DALI XX LT2 L ZIP (640.7 KB)

Packaging information

Product code	Packaging unit Piece / unit		Gross weight	Volume
4052899245389	UNV 1		275.00g
4052899245396	VS 20	385mm x 160mm x 100mm	5671.00g	6.16dm³

Country-specific information

EAN	ELDAS number
4052899245389	941791400

Product features and benefits

Product family benefits

Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at T_c = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W *
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Versatile scope of application due to OSRAM DALI Technology:

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance

Areas of application

Linear lighting for office, education, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I

Product family features

Line frequency: 0 Hz | 50 Hz | 60 Hz
Versatile DALI window driver up to 80 W due to flexible output characteristic
Supply voltage: 220…240 V
Available with output current range: up to 2,100 mA
Constant Lumen Output (CLO)
Integrated customizable thermal management (Driver Guard)
DALI-2 certified (Part -101,-102 and -207)

OPTOTRONIC Intelligent

35/220…240/700 LT2 L G2

50/220…240/1A4 LT2 L G2

35/220…240/700 LT2 L

80/220…240/1A6 LT2 L

80/220…240/2A1 LT2 L

90/220…240/1A0 LT2 L

90/220…240/700 D LT2 L

60/220…240/550 D LT2 L

35/220-240/400 D LT2 L

Overview OPTOTRONIC Intelligent