Professional
Country

OPTOTRONIC Intelligent

Choose your product version

35/220…240/700 LT2 L G2

35/220…240/700 LT2 L G2
50/220…240/1A4 LT2 L G2

50/220…240/1A4 LT2 L G2
35/220…240/700 LT2 L

35/220…240/700 LT2 L
80/220…240/1A6 LT2 L

80/220…240/1A6 LT2 L
80/220…240/2A1 LT2 L

80/220…240/2A1 LT2 L
90/220…240/1A0 LT2 L

90/220…240/1A0 LT2 L
90/220…240/700 D LT2 L

90/220…240/700 D LT2 L
60/220…240/550 D LT2 L

60/220…240/550 D LT2 L
35/220-240/400 D LT2 L

35/220-240/400 D LT2 L
Product family: important data at a glance

Overview OPTOTRONIC Intelligent

Product description Length Width Height Product weight Prewired
OTi DALI 35/220…240/700 LT2 L G2 360.0mm 30.0mm 21.0mm 240.00g
OTi DALI 50/220…240/1A4 LT2 L G2 360.0mm 30.0mm 21.0mm 240.00g
OTi DALI 35/220…240/700 LT2 L 360.0mm 30.0mm 21.0mm 275.00g
OTi DALI 80/220…240/1A6 LT2 L 360.0mm 30.0mm 21.0mm 285.00g
OTi DALI 80/220…240/2A1 LT2 L 360.0mm 30.0mm 21.0mm 285.00g
OTi DALI 90/220…240/1A0 LT2 L 280.0mm 30.0mm 21.0mm 205.00g
OTi DALI 90/220…240/700 D LT2 L 280.0mm 30.0mm 21.0mm 205.00g
OTi DALI 60/220…240/550 D LT2 L 280.0mm 30.0mm 21.0mm 205.00g
OTi DALI 35/220-240/400 D LT2 L 280.0mm 30.0mm 21.0mm 205.00g
Family data sheet
 

OTi DALI 80/220…240/1A6 LT2 L

Product family benefits
  • Fully programmable via software (DALI Interface)
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Very low standby power consumption: < 0.15 W *
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Input voltage DC 176…276 V
Total harmonic distortion < 20 %
Power factor λ
> 0.95
ECG efficiency
≧90 %
Device power loss
8.5 W
Power loss in stand-by mode <0.5 W
Protective conductor current <2.0 mA
Inrush current
53 A
Max. ECG no. on circuit breaker 10 A (B) 8
Max. ECG no. on circuit breaker 16 A (B) 13
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
20…54 V
U-OUT (working voltage) < 60 V
Nominal output current
600…1550 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 1 %
Nominal output power 32…80 W
Galvanic isolation SELV
Galvanic isolation primary/secondary
3.75 kV

Dimensions & weight

Length 360.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 350.0 mm
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Product weight 285.00 g
Wire preparation length, input side 8.5…9.5 mm
Wire preparation length, output side 8.5…9.5 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -25…+50 °C
Maximum temperature at tc test point 80 °C
Max.housing temperature in case of fault 120 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface DALI / Touch DIM / Touch DIM Sensor
Dimming range
1…100 %
Dimming method Amplitude Modulation / Pulse Width Modulation
Constant lumen function Programmable
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval CE / EL / ENEC 10 / VDE-EMC / CCC / RCM
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Type of protection IP20

Logistical data

Temperature range at storage -25…85 °C
Product line drawing
Product line drawing
502044_OTI DALI 80220-2401A6 LT2 L EPS (366.5 KB)
User instruction
User instruction
OPTOTRONIC LED Power Supply PDF (3.0 MB)
Product Datasheet
Product Datasheet
491301_Datasheet_OTi DALI 80220-2401A6 LT2 L PDF (322.2 KB)
Certificates
Certificates
OT FIT OTI DALI LT2 CB DE1 63464 060520 PDF (264.0 KB)
Certificates
Certificates
VDE ENEC Certificate 40038447 PDF (705.5 KB)
Certificates
Certificates
489311_CB Certificate OTi DALI LT2 L PDF (1.5 MB)
Certificates
Certificates
494640_CE Declaration OTi DALI linear PDF (1.6 MB)
Certificates
Certificates
VDE EMC Certificate 40038827 PDF (621.0 KB)
Certificates
Certificates
OTI DALI 80 1A6 LT2 L INOTEC AM20234 270420 PDF (338.9 KB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3366462 PDF (574.3 KB)
CAD data
CAD data
OTI DALI 80 LT2 L IGS 270220 ZIP (608.3 KB)
CAD data
CAD data
OTI DALI 80 LT2 L STEP 270220 ZIP (554.4 KB)
CAD Data 2-dim
CAD Data 2-dim
OTI DALI 80 LT2 L CAD2PDF 270220 ZIP (95.1 KB)
CAD data 3-dim
CAD data 3-dim
546351_OTi-DALI XX LT2 L ZIP (640.7 KB)
CAD data 3-dim
CAD data 3-dim
OTI DALI 80 LT2 L CAD3PDF 270220 ZIP (118.8 KB)
Advertisements
Advertisements
538835_Poster OPTOTRONIC LED drivers (EN) PDF (3.0 MB)
Product code Packaging unit
Piece / unit		 Gross weight Volume
4052899028074 UNV
1		 285.00g
4052899028081 VS
20		 385mm x 160mm x 100mm 5871.00g 6.16dm³
EAN EFO number ELDAS number
4052899028074 6615943 941795400
Product family benefits
  • Fully programmable via software (DALI Interface)
  • Flexible current setting (LEDset2)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
  • High quality of light thanks to <1% output ripple current
  • Very high efficiency
  • Very low standby power consumption: < 0.15 W *
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Versatile scope of application due to OSRAM DALI Technology:
  • Easy to use in corridors and restrooms because of three-level Corridor function
  • Touch DIM application: easy to control via pushbutton or sensor
  • Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
  • Luminaire information for easy maintenance
Areas of application
  • Linear lighting for office, education, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile DALI window driver up to 80 W due to flexible output characteristic
  • Supply voltage: 220…240 V
  • Available with output current range: up to 2,100 mA
  • Constant Lumen Output (CLO)
  • Integrated customizable thermal management (Driver Guard)
  • DALI-2 certified (Part -101,-102 and -207)