Professional
Country

OPTOTRONIC Intelligent

Choose your product version

35/220…240/400 D NFC L

35/220…240/400 D NFC L
75/220…240/600 D NFC L

75/220…240/600 D NFC L
Product family: important data at a glance

Overview OPTOTRONIC Intelligent

Product description Length Width Height Product weight Prewired
OTI DX 35/220…240/400 D NFC L 360.0mm 30.0mm 21.0mm 227.40g
OTI DX 75/220…240/600 D NFC L 360.0mm 30.0mm 21.0mm 243.00g
Family data sheet
 

OTI DX 35/220…240/400 D NFC L

Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Very high efficiency
  • Protection against 4 kV burst and 1.5 kV surge voltage (L-N)
  • Wide operating range up to 600 mA
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V
Input voltage DC 176…276 V
Total harmonic distortion
< 10 %
Power factor λ > 0.95
ECG efficiency
90 %
Device power loss 3.8 W
Power loss in stand-by mode
<0.25 W
Inrush current 18 A
Max. ECG no. on circuit breaker 10 A (B) 17
Max. ECG no. on circuit breaker 16 A (B) 28
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1.5 kV
Nominal output voltage 54…240 V
U-OUT (working voltage) < 250 V
Nominal output current 75…400 mA
Output current tolerance ±5 %
Output ripple current (100 Hz) < 4 %
Nominal output power 4…38 W
Galvanic isolation Non isolated

Dimensions & weight

Length 360.0 mm
Width 30.0 mm
Height 21.0 mm
Mounting hole spacing, length 350.0 mm
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Product weight 227.40 g
Wire preparation length, input side 8.0…9.0 mm
Wire preparation length, output side 8.0…9.0 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -25…+60 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface DALI / DEXAL
Dimming range 1…100 %
Dimming method
Analog and PWM dimming
Constant lumen function Programmable
Overheating protection Automatic reversible
Overload protection Non-reversible
Short-circuit protection Yes
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval CE / VDE / ENEC 10 / VDE-EMC / RCM / CCC / EAC / BIS / EL
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product line drawing
Product line drawing
OTI DALI 100220-240700 D NFC IND L EPS (408.4 KB)
Wiring diagram
Wiring diagram
Wiring diagram OTI DX D NFC L TIF (371.2 KB)
User instruction
User instruction
OPTOTRONIC LED Power Supply PDF (2.7 MB)
Product Datasheet
Product Datasheet
Product datasheet OTI DX 75 PDF (740.9 KB)
Certificates
Certificates
VDE ENEC Certificate 40038085 PDF (633.4 KB)
Certificates
Certificates
VDE EMC Certificate 40044675 (EN) PDF (625.8 KB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3704710 PDF (513.5 KB)
CAD data
CAD data
CAD data IGS OTI DX 35,75D NFC L ZIP (1.9 MB)
CAD data
CAD data
CAD data STEP OTI DX 35,75D NFC L ZIP (2.0 MB)
CAD data PDF
CAD data PDF
CAD data PDF OTI DX 35,75D NFC L ZIP (261.6 KB)
Advertisements
Advertisements
538835_Poster OPTOTRONIC LED drivers (EN) PDF (3.0 MB)
Product code Packaging unit
Piece / unit		 Dimensions in h x w x l Gross weight Volume
4052899590380 UNV
1		 215.00g
4052899590397 VS
20		 385mm x 160mm x 100mm 4719.00g 6.16dm³
Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Very high efficiency
  • Protection against 4 kV burst and 1.5 kV surge voltage (L-N)
  • Wide operating range up to 600 mA
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • DEXAL, easy connection to different partner BMS systems
  • Suitable for "Works with OSRAM DEXAL" partner components
  • Suitable for luminaires of protection class I
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Supply voltage: 220…240 V
  • Constant Lumen Output (CLO)
  • Monitoring of luminaire operating parameters
  • Non-isolated drivers

This website uses cookies...
Read more

This website uses cookies to offer you certain services and to enhance your user experience. By continuing to use our website you consent to the usage of cookies as described in our Cookie Policy .
Less

This website uses cookies to offer you certain services and to enhance your user experience. By continuing to use our website you consent to the usage of cookies as described in our Cookie Policy .