Choose your product version
| Product description | Length | Width | Height | Product weight | Prewired |
|---|---|---|---|---|---|
| OTi DALI 50/220…240/24 1…4 CH | 346.0mm | 32.0mm | 22.0mm | 191.00g | |
| OTi DALI 50/220…240/24 TW | 346.0mm | 32.0mm | 22.0mm | 191.00g | |
| OTi DALI 75/220…240/24 1…4 CH | 220.0mm | 46.2mm | 43.6mm | 350.00g | |
| OTi DALI 80/220…240/24 1…4 CH | 346.0mm | 32.0mm | 22.0mm | 191.00g | |
| OTi DALI 80/220…240/24 TW | 346.0mm | 32.0mm | 22.0mm | 191.00g | |
| OTi DALI 160/220…240/24 1-2 CH | 300.0mm | 50.0mm | 35.0mm | 380.00g | |
| OTi DALI 160/220…240/24 TW | 300.0mm | 50.0mm | 35.0mm | 380.00g |
| Nominal voltage | 220…240 V |
| Mains frequency | 50/60 Hz |
| Input voltage AC | 198…264 V |
| Total harmonic distortion | < 5 % |
| Power factor λ | > 0.95 |
| ECG efficiency | 92 % |
| Device power loss | 5.0 W |
| Power loss in stand-by mode | 0.3 W |
| Inrush current | 43 A |
| Max. ECG no. on circuit breaker 10 A (B) | 9 |
| Max. ECG no. on circuit breaker 16 A (B) | 15 |
| Max. ECG no. on circuit breaker 25 A (B) | 27 |
| Surge capability (L/N-Ground) | 2 kV |
| Surge capability (L-N) | 1 kV |
| Nominal output voltage |
24 V
|
| U-OUT (working voltage) | 24.2 V |
| Nominal output power | 50 W |
| Galvanic isolation | SELV |
| Galvanic isolation primary/secondary | 3.75 kV |
| Length | 346.0 mm |
| Width | 32.0 mm |
| Height | 22.0 mm |
| Mounting hole spacing, length | 300.6 mm |
| Cable cross-section, input side | 0.5…2.5 mm² |
| Cable cross-section, output side | 0.2…1.5 mm² |
| Product weight | 191.00 g |
| Wire preparation length, input side | 6.0 mm |
| Wire preparation length, output side | 5.0 mm |
| Casing material | Plastic |
| Ambient temperature range | -20…+45 °C |
| Maximum temperature at tc test point | 70 °C |
| Max.housing temperature in case of fault | 115 °C |
| Permitted rel. humidity during operation |
5…85 %
|
| ECG lifetime |
50000 h
|
| Encapsulated | Yes |
| Dimmable | Yes |
| Dimming interface | DALI-2 |
| Dimming range | 0…100 % |
| Dimming method | Pulse Width Modulation |
| Overheating protection | Automatic reversible |
| Overload protection | Automatic reversible |
| Short-circuit protection | Automatic reversible |
| No-load proof | Yes |
| Max. cable length to lamp/LED module | 10 m |
| Suitable for fixtures with prot. class | I / II |
| Type of connection, output side | Screw terminal |
| Approval marks – approval | CE / ENEC 10 / VDE / VDE-EMC / RCM / EAC / CCC / BIS |
| Standards | Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015 |
| Protection class | II |
| Type of protection | IP20 |
| Temperature range at storage | -40…+85 °C |
| Product code | Packaging unit Piece / unit |
Dimensions in h x w x l | Gross weight | Volume |
|---|---|---|---|---|
| 4052899452916 | UNV 1 |
|||
| 4052899452923 | VS 20 |
370mm x 170mm x 116mm | 3998.00g | 7.30dm³ |
| EAN | ELDAS number |
|---|---|
| 4052899452916 | 941796500 |
.pdf.jpg "Product Datasheet")
.pdf.jpg "Advertisements")