Professional
Country

CV Power supplies with DALI

Choose your product version

Overview CV Power supplies with DALI

Product description Length Width Height Product weight Prewired
OTi DALI 50/220…240/24 1…4 CH 346.0mm 32.0mm 22.0mm 191.00g
OTi DALI 50/220…240/24 TW 346.0mm 32.0mm 22.0mm 191.00g
OTi DALI 75/220…240/24 1…4 CH 220.0mm 46.2mm 43.6mm 350.00g
OTi DALI 80/220…240/24 1…4 CH 346.0mm 32.0mm 22.0mm 191.00g
OTi DALI 80/220…240/24 TW 346.0mm 32.0mm 22.0mm 191.00g
OTi DALI 160/220…240/24 1-2 CH 300.0mm 50.0mm 35.0mm 380.00g
OTi DALI 160/220…240/24 TW 300.0mm 50.0mm 35.0mm 380.00g
 

OTi DALI 160/220…240/24 TW

Product family benefits
  • Intelligent power matching thanks to Smart power supply
  • Slim form factor for mounting on the cove or in linear luminaires
  • Minimized flicker thanks to high PWM frequency
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Available as Tunable White version (DALI Device Type 8)
  • DALI message detection "LED Module failure"
  • IP rating: IP20

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V
Total harmonic distortion < 5 %
Power factor λ 0.99
ECG efficiency 93 %
Device power loss 11 W
Power loss in stand-by mode 0.36 W
Inrush current 69 A
Max. ECG no. on circuit breaker 10 A (B) 5
Max. ECG no. on circuit breaker 16 A (B) 8
Max. ECG no. on circuit breaker 25 A (B) 13
Surge capability (L-N) 1 kV
Nominal output voltage
24 V
U-OUT (working voltage) 24.2 V
Nominal output power 160 W
Galvanic isolation SELV
Galvanic isolation primary/secondary 3 kV

Dimensions & weight

Length 300.0 mm
Width 50.0 mm
Height 35.0 mm
Mounting hole spacing, length 258.0 mm
Cable cross-section, input side 0.5…2.5 mm²
Cable cross-section, output side 0.5…2.5 mm²
Product weight 380.00 g
Wire preparation length, input side 6.0 mm
Wire preparation length, output side 6.0 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+45 °C
Maximum temperature at tc test point 90 °C
Max.housing temperature in case of fault 120 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface DALI
Dimming range 0…100 %
Dimming method Pulse Width Modulation
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Suitable for fixtures with prot. class I / II
Type of connection, output side Screw terminal

Certificates & standards

Approval marks – approval EL / CCC / EAC / CE / ENEC 10 / VDE / EMC
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386
Protection class II
Type of protection IP20

Logistical data

Temperature range at storage -25…85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4052899986312 UNV
1
4052899986336 VS
20
335mm x 268mm x 167mm 8065.00g 14.99dm³
EAN ELDAS number
4052899986312 919492120
Product family benefits
  • Intelligent power matching thanks to Smart power supply
  • Slim form factor for mounting on the cove or in linear luminaires
  • Minimized flicker thanks to high PWM frequency
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Available as Tunable White version (DALI Device Type 8)
  • DALI message detection "LED Module failure"
  • IP rating: IP20
Areas of application
  • Cove lighting, wall washer, corridor, handrail
  • Suitable for use in luminaires of protection class I and II
Product family features
  • Dimmable via Touch DIM (if supported)
  • LED driver whose output power can be shared arbitrarily among the 2 or 4 channels
  • Dimming range: 0…100 %
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
Equipment / Accessories
  • Suitable for 24 V LED modules