Professional
Country

CV Power supplies with 1…10 V

Choose your product version

Overview CV Power supplies with 1…10 V

Product description Length Width Height Product weight Prewired
OT 80/220…240/24 DIM P 250.0mm 50.0mm 34.0mm 900.00g
OT 240/220…240/24 DIM P 250.0mm 80.0mm 39.0mm 1500.00g
 

OT 80/220…240/24 DIM P

Product benefits
  • Versatile 1…10 V window driver up to 240 W due to flexible output characteristic
  • Very high efficiency and reliability
  • High IP protection (IP67)
  • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)

Product details

Maximum number of LED chains per ECG 0.75
Maximum number of LED modules per ECG 11
Maximum number of LED chains per ECG 0.75
Maximum number of LED modules per ECG 22
Maximum length of LED module per ECG 4.4 m
Maximum length of LED module per ECG 19.5 m
Maximum length of LED module per ECG 13.2 m
Maximum length of LED module per ECG 16 m
Maximum length of LED module per ECG 4.2 m
Maximum length of LED module per ECG 8.25 m

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Total harmonic distortion < 20 %
Power factor λ
0.90/0.95
ECG efficiency
87 %
Device power loss
12 W
Power loss in stand-by mode <1,5 W
Inrush current
35 A
Max. ECG no. on circuit breaker 10 A (B) 7
Max. ECG no. on circuit breaker 16 A (B) 10
Max. ECG no. on circuit breaker 25 A (B) 17
Surge capability (L-N) 3 kV
Nominal output voltage
24 V
U-OUT (working voltage) 24 V
Nominal output power
80 W
Galvanic isolation SELV
Galvanic isolation primary/secondary
3.75 kV

Dimensions & weight

Length 250.0 mm
Width 50.0 mm
Height 34.0 mm
Mounting hole spacing, length 241.0 mm
Cable cross-section, input side
1.0 mm²
Cable cross-section, output side
1.5 mm²
Product weight 900.00 g
Wire preparation length, input side 10…11 mm
Wire preparation length, output side 10…11 mm
Cable/wire length, control input 300 mm
Cable/wire length, input side 300 mm
Cable/wire length, output side 300 mm

Colors & materials

Casing material Metal

Temperatures & operating conditions

Ambient temperature range -25…+55 °C
Maximum temperature at tc test point
80 °C
Max.housing temperature in case of fault 100 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface
1…10 V
Dimming range 3…100 %
Dimming method Pulse Width Modulation
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 10 m
Suitable for fixtures with prot. class II
Type of connection, output side Wires

Certificates & standards

Approval marks – approval CE / CB / RCM / EAC / ENEC 18 / BIS
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class II
Type of protection IP67

Logistical data

Temperature range at storage -40…85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4008321981677 FS
1
334mm x 88mm x 50mm 970.00g 1.47dm³
4008321981738 VS
10
499mm x 140mm x 393mm 11150.00g 27.45dm³
EAN SEG number STK number EFO number ELDAS number
4008321981677 7980406 4030037 6659862 919491920
Product benefits
  • Versatile 1…10 V window driver up to 240 W due to flexible output characteristic
  • Very high efficiency and reliability
  • High IP protection (IP67)
  • High surge protection: up to 3 kV (L-N) / 6 kV (L/N-PE)
Areas of application
  • Suitable for use in tight, flat luminaires or installation in suspended ceilings
  • Suitable for indoor and outdoor SELV installations
Product features
  • Dimmable via fully isolated 1...10 V interface
  • Driver with output power range of up to 240 W