Choose your product version
| Product description | Nominal voltage | Length | Width | Height | Mounting hole spacing, length |
|---|---|---|---|---|---|
| OTe 10/220…240/700 PC | 220…240V | 95.0mm | 53.0mm | 25.0mm | -mm |
| OTe 13/220…240/350 PC | 220…240V | 95.0mm | 53.0mm | 25.0mm | -mm |
| OTe 18/220…240/500 PC | 220…240V | 95.0mm | 53.0mm | 30.0mm | -mm |
| OTe 18/220…240/350 PC | 220…240V | 95.0mm | 53.0mm | 30.0mm | -mm |
| OTe 25/220…240/700 PC | 220…240V | 95.0mm | 53.0mm | 30.0mm | -mm |
| OTe 35/220…240/700 PC | 220…240V | 153.0mm | 54.0mm | 36.0mm | 146.0mm |
| Nominal voltage | 220…240 V |
| Mains frequency | 50…60 Hz |
| Input voltage AC |
198…264 V
|
| Total harmonic distortion | 15 % |
| Power factor λ |
0.95/0.90
|
| ECG efficiency |
86 %
|
| Device power loss |
3.0 W
|
| Inrush current |
5 A
|
| Max. ECG no. on circuit breaker 10 A (B) | 53 |
| Max. ECG no. on circuit breaker 16 A (B) | 84 |
| Max. ECG no. on circuit breaker 25 A (B) | - |
| Surge capability (L/N-Ground) | 1 kV |
| Surge capability (L-N) | 1 kV |
| Nominal output voltage |
27…54 V
|
| U-OUT (working voltage) | 50 V |
| Nominal output current |
350 mA
|
| Output current tolerance | ±10 % |
| Output ripple current (100 Hz) | < 35 % |
| Nominal output power |
19 W
|
| Galvanic isolation | SELV |
| Galvanic isolation primary/secondary | 3 kV |
| Length | 95.0 mm |
| Width | 53.0 mm |
| Height | 30.0 mm |
| Mounting hole spacing, length | - mm |
| Cable cross-section, input side |
0.75…1.5 mm²
|
| Cable cross-section, output side |
0.5…1.5 mm²
|
| Product weight | 93.00 g |
| Wire preparation length, input side | 8.0…9.0 mm |
| Wire preparation length, output side | 8.0…9.0 mm |
| Casing material | Plastic |
| Ambient temperature range | -20…+50 °C |
| Maximum temperature at tc test point |
75 °C
|
| Max.housing temperature in case of fault | 110 °C |
| Permitted rel. humidity during operation |
5…85 %
|
| ECG lifetime |
50000 h
|
| Encapsulated | No |
| Dimmable | Yes |
| Dimming interface |
Phase Cut
|
| Dimming range | 10…100 % |
| Dimming method | Amplitude Modulation |
| Overheating protection | Automatic reversible |
| Overload protection | Automatic reversible |
| Short-circuit protection | Automatic reversible |
| No-load proof | Yes |
| Max. cable length to lamp/LED module | 2.0 m |
| Suitable for fixtures with prot. class | I / II |
| Type of connection, output side | Push terminal |
| Approval marks – approval | CE / ENEC 10 / VDE / CB |
| Standards | Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547 |
| Protection class | II |
| Type of protection | IP20 |
| Temperature range at storage | -25…75 °C |
| OT CABLE CLAMP E-STYLE | 4052899167896 |
| Product code | Packaging unit Piece / unit |
Dimensions in h x w x l | Gross weight | Volume |
|---|---|---|---|---|
| 4052899105348 | UNV 1 |
110.00g | ||
| 4052899105355 | VS 20 |
284mm x 207mm x 100mm | 2478.00g | 5.88dm³ |
| EAN | SEG number | STK number | EFO number | ELDAS number |
|---|---|---|---|---|
| 4052899105348 | 7980872 | 4030293 | 6615916 | 941793000 |
.pdf.jpg "Advertisements")