Professional
Country

OPTOTRONIC FIT LT2 LP

Choose your product version

Overview OPTOTRONIC FIT LT2 LP

Product description Nominal voltage Mains frequency Input voltage AC Total harmonic distortion Power factor λ
OT FIT 15/220…240/500 LT2 LP 220…240V 50…60Hz 198…264V < 15% 0.95
OT FIT 25/220…240/700 LT2 LP 220…240V 50…60Hz 198…264V < 15% 0.95
OT FIT 40/220…240/1A0 LT2 LP 220…240V 50…60Hz 198…264V < 15% 0.98
 

OT FIT 25/220…240/700 LT2 LP

Product family benefits
  • Versatile scope of application due to output power range of up to 40 W
  • Fulfill safety requirement due to overload, overtemperature protection
  • High efficiency
  • Higher quality of light thanks to < 5% output ripple current

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V
Input voltage DC 176…276 V
Total harmonic distortion < 15 %
Power factor λ 0.95
ECG efficiency 86 %
Device power loss 4.5 W
Inrush current
15 A
Max. ECG no. on circuit breaker 10 A (B) 20
Max. ECG no. on circuit breaker 16 A (B) 30
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N) 1 kV
Nominal output voltage 15…50 V
U-OUT (working voltage) 60 V
Nominal output current 300…700 mA
Output current tolerance ±5 %
Output ripple current (100 Hz) < 5 %
Nominal output power 8.0…26.5 W
Galvanic isolation SELV

Dimensions & weight

Length 103.0 mm
Width 67.0 mm
Height 22.5 mm
Mounting hole spacing, length 94.0 mm
Mounting hole spacing, width 58.0 mm
Cable cross-section, input side 0.5…1.5 mm²
Cable cross-section, output side 0.5…1.5 mm²
Product weight 125.00 g
Wire preparation length, input side 9.0…10.0 mm
Wire preparation length, output side 8.0…9.0 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+45 °C
Maximum temperature at tc test point 75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable No
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I / II
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval CE
Standards Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to EN 55015
Protection class II
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4052899490697 UNV
1
4052899490703 VS
20
348mm x 218mm x 67mm 2662.00g 5.08dm³
Product family benefits
  • Versatile scope of application due to output power range of up to 40 W
  • Fulfill safety requirement due to overload, overtemperature protection
  • High efficiency
  • Higher quality of light thanks to < 5% output ripple current
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Luminaires with flexible current setting (LEDset2)
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Independent mounting via Cable Clamp Kit possible
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression: to EN 55015
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • Independent connection via through-looping (depending on version of product)