Choose your product version
| Product description | Nominal voltage | Mains frequency | Input voltage AC | Total harmonic distortion | Power factor λ |
|---|---|---|---|---|---|
| OT FIT 20/220…240/500 CS | 220…240V | 50…60Hz | 198…264V | < 10% | 0.98 |
| OT FIT 30/220…240/700 CS | 220…240V | 50…60Hz | 198…264V | < 10% | 0.98 |
| OT FIT 40/220…240/1A0 CS | 220…240V | 50…60Hz | 198…264V | < 10% | 0.98 |
| OT FIT 75/220-240/1A6 CS | 220…240V | 50…60Hz | 198…264V | < 10% | 0.98 |
| Nominal voltage | 220…240 V |
| Mains frequency | 50…60 Hz |
| Input voltage AC | 198…264 V |
| Total harmonic distortion |
< 10 %
|
| Power factor λ | 0.98 |
| ECG efficiency |
87 %
|
| Device power loss |
3.0 W
|
| Protective conductor current | <0.7 mA |
| Inrush current |
< 16 A
|
| Max. ECG no. on circuit breaker 10 A (B) | 32 |
| Max. ECG no. on circuit breaker 16 A (B) | 50 |
| Max. ECG no. on circuit breaker 25 A (B) | - |
| Surge capability (L/N-Ground) | 2 kV |
| Surge capability (L-N) | 1 kV |
| Nominal output voltage | 25…42 V |
| U-OUT (working voltage) | 60 V |
| Nominal output current | 250 / 350 / 450 / 500 mA |
| Output current tolerance | ±7.5 % |
| Output ripple current (100 Hz) | < 5 % |
| Nominal output power | 6.5…21 W |
| Galvanic isolation | SELV |
| Length | 97.0 mm |
| Width | 43.0 mm |
| Height | 29.5 mm |
| Mounting hole spacing, length | 88.0 mm |
| Mounting hole spacing, width | 34.0 mm |
| Cable cross-section, input side | 0.5…1.5 mm² |
| Cable cross-section, output side | 0.5…1.5 mm² |
| Product weight | 85.00 g |
| Wire preparation length, input side | 7…8 mm |
| Wire preparation length, output side | 7…8 mm |
| Casing material | Plastic |
| Ambient temperature range | -20…+50 °C |
| Maximum temperature at tc test point | 80 °C |
| Max.housing temperature in case of fault | 110 °C |
| Permitted rel. humidity during operation |
5…85 %
|
| ECG lifetime |
50000 / 30000 h
|
| Encapsulated | No |
| Dimmable | No |
| Overheating protection | Automatic reversible |
| Overload protection | Automatic reversible |
| Short-circuit protection | Automatic reversible |
| No-load proof | Yes |
| Max. cable length to lamp/LED module | 2.0 m |
| Suitable for fixtures with prot. class | II |
| Type of connection, output side | Push terminal |
| Approval marks – approval | CCC / CE / RCM / ENEC 05 |
| Standards | Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547 |
| Protection class | II |
| Type of protection | IP20 |
| Temperature range at storage | -20…80 °C |
| Product code | Packaging unit Piece / unit |
Dimensions in h x w x l | Gross weight | Volume |
|---|---|---|---|---|
| 4052899435612 | UNV 1 |
|||
| 4052899435629 | VS 20 |
228mm x 208mm x 78mm | 1806.00g | 3.70dm³ |
.pdf.jpg "Advertisements")