Professional
Country
 

OT FIT 35/220…240/700 CS

Product family benefits
  • Versatile scope of application due to output power range of up to 54 W
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
  • High efficiency
  • Higher quality of light thanks to low output ripple current

Product details

Electrical data

Nominal voltage 200…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Input voltage DC 176…276 V
Total harmonic distortion < 10 %
Power factor λ
0.95/0.85
ECG efficiency
87 %
Device power loss
5.0 W
Inrush current
24 A
Max. ECG no. on circuit breaker 10 A (B) 18
Max. ECG no. on circuit breaker 16 A (B) 28
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
27…54 V
U-OUT (working voltage) 60 V
Nominal output current
550 / 600 / 700 mA
Output current tolerance ±10 %
Output ripple current (100 Hz) < 5 %
Nominal output power
37.8 W
Galvanic isolation SELV
Galvanic isolation primary/secondary
3.75 kV

Dimensions & weight

Length 103.0 mm
Width 67.0 mm
Height 29.5 mm
Mounting hole spacing, length 94.0 mm
Mounting hole spacing, width 58.0 mm
Cable cross-section, input side
0.2…1.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Product weight 165.00 g
Wire preparation length, input side 8.5…9.5 mm
Wire preparation length, output side 8.5…9.5 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -25…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 h

Additional product data

Encapsulated No

Capabilities

Dimmable No
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I / II
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval ENEC 10 / VDE / EMC / EL / CE
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Protection class II
Type of protection IP20

Logistical data

Temperature range at storage -25…85 °C
OT CABLE CLAMP B-STYLE 4052899077881
OT CABLE CLAMP B-STYLE TL 4052899948051
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4052899919402 UNV
1
165.00g
4052899919471 VS
20
357mm x 222mm x 96mm 3522.00g 7.61dm³
EAN SEG number
4052899919402 7980702
Product family benefits
  • Versatile scope of application due to output power range of up to 54 W
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
  • High efficiency
  • Higher quality of light thanks to low output ripple current
Areas of application
  • Emergency lighting systems acc. to IEC 61347-2-13, app. J (CS version only)
  • Luminaires with flexible current setting (Tri-Tap for CS version only)
  • Luminaires with flexible current setting (LEDset for LT2 S version only)
  • Suitable for use in emergency lighting systems, DC capable (CS version only)
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Independent mounting via Cable Clamp Kit possible (depending on version of product)
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
  • RI suppression according to EN 55015:2007+A1:2007/CDN
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • LED protection by Hot Plug
  • Independent connection via through-looping (CS version only)