Professional
Country

OPTOTRONIC Intelligent – DALI NFC

Choose your product version

Overview OPTOTRONIC Intelligent – DALI NFC

Product description Nominal voltage Mains frequency Input voltage AC Total harmonic distortion Power factor λ
OTi DALI 25/220…240/700 NFC 220…240V 50…60Hz 198…264V < 10% > 0.95
OTi DALI 35/220…240/1A0 NFC 220…240V 50…60Hz 198…264V < 10% > 0.95
 

OTi DALI 25/220…240/700 NFC

Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • DALI-2 certified incl. Parts 251, 252, 253
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to OSRAM DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC
198…264 V
Input voltage DC 176…276 V
Total harmonic distortion
< 10 %
Power factor λ > 0.95
ECG efficiency
88 %
Device power loss - W
Inrush current
15 A
Max. ECG no. on circuit breaker 10 A (B) 18
Max. ECG no. on circuit breaker 16 A (B) 28
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
15…50 V
U-OUT (working voltage) 60 V
Nominal output current
180…700 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 3 %
Nominal output power
27 W
Galvanic isolation SELV
Galvanic isolation primary/secondary 3.75 kV

Dimensions & weight

Length 103.0 mm
Width 67.0 mm
Height 29.5 mm
Mounting hole spacing, length 94.0 mm
Mounting hole spacing, width 58.0 mm
Cable cross-section, input side
0.2…1.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Product weight 145.00 g
Wire preparation length, input side 8.0…9.0 mm
Wire preparation length, output side 8.0…9.0 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I / II
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval CE / EL / ENEC 10 / VDE / VDE-EMC / DALI-2 / EAC / MM
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class II
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4062172017909 UNV
1
145.00g
4062172017916 VS
20
357mm x 222mm x 96mm 3225.00g 7.61dm³
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • DALI-2 certified incl. Parts 251, 252, 253
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to OSRAM DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to EN 55015:2007+A1:2007/CDN
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h
  • Type of protection: IP20