Professional
Country

OPTOTRONIC Intelligent – DALI LT2 NFC

Choose your product version

10/220…240/700 NFC

10/220…240/700 NFC
50/220...240/1A4 LT2 FAN NFC

50/220...240/1A4 LT2 FAN NFC
Product family: important data at a glance

Overview OPTOTRONIC Intelligent – DALI LT2 NFC

Product description Length Width Height Product weight Prewired
OTi DALI 10/220…240/700 NFC 124.0mm 31.0mm 21.0mm 50.00g
OTi DALI 50/220...240/1A4 LT2 FAN NFC 110.0mm 75.0mm 25.0mm 180.00g
Family data sheet
 

OTi DALI 10/220…240/700 NFC

Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Very high efficiency
  • Protection of the system thanks to thermal management and Smart Control
  • High-quality dimming of 1…100 % by amplitude dimming
  • Easy and fast output current setting via NFC
Versatile scope of application due to OSRAM DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
View all details
Product Data sheet
Go to Predecessor product data
Family data sheet

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 0…60 Hz
Input voltage AC
198…264 V
Input voltage DC 176…276 V
Total harmonic distortion
15 %
Power factor λ > 0.98/> 0.94
ECG efficiency
82 %
Device power loss 3.5 W
Power loss in stand-by mode ≤0.15 W
Inrush current
< 5 A
Max. ECG no. on circuit breaker 10 A (B) 80
Max. ECG no. on circuit breaker 16 A (B) 130
Max. ECG no. on circuit breaker 25 A (B) -
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
2.5…45 V
U-OUT (working voltage) 60 V
Nominal output current
150…700 mA
Output current tolerance ±3 %
Output ripple current (100 Hz) < 2 %
Nominal output power
10 W
Galvanic isolation SELV
Galvanic isolation primary/secondary 3.75 kV

Dimensions & weight

Length 124.0 mm
Width 31.0 mm
Height 21.0 mm
Mounting hole spacing, length 115.0 mm
Cable cross-section, input side
0.2…1.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Product weight 50.00 g
Wire preparation length, input side 8.0…9.1 mm
Wire preparation length, output side 8.0…9.1 mm

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 / 100000 h

Additional product data

Encapsulated No

Capabilities

Dimmable Yes
Dimming interface DALI
Dimming range
1…100 %
Dimming method Amplitude Modulation
Constant lumen function Programmable
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I / II
Suitable for emergency lighting Yes
Type of connection, output side Push terminal

Certificates & standards

Approval marks – approval ENEC 10 / VDE / EMC / EL / CE / DALI-2 / CCC
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class II
Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C
Product line drawing
Product line drawing
OTI DALI 10220-240700 NFC EPS (402.5 KB)
User instruction
User instruction
OPTOTRONIC LED Power Supply PDF (2.4 MB)
User instruction
User instruction
OPTOTRONIC LED Power Supply PDF (2.8 MB)
Product Datasheet
Product Datasheet
Technical datasheet OTI DALI 10 NFC PDF (409.7 KB)
Certificates
Certificates
OTI DALI 10 NFC EATON AM29184 210720 PDF (142.3 KB)
Certificates
Certificates
OTI DALI 10 NFC INOTEC AM29184 210720 PDF (333.4 KB)
Certificates
Certificates
730563_VDE Certificate PDF (642.4 KB)
Certificates
Certificates
VDE ENEC Certificate 40038447 PDF (705.5 KB)
Certificates
Certificates
VDE EMC Certificate 40044675 (EN) PDF (625.8 KB)
Certificates
Certificates
OT EMC 40050085 200220 PDF (259.0 KB)
Declarations of conformity
Declarations of conformity
INOTEC Conformity declaration AM07730 OTiD ALI 10 220-240 700 NFC PDF (1.6 MB)
Declarations of conformity
Declarations of conformity
EATON(CEAG) Conformity declaration AM07730_OTi_DALI_10_220-240_700_NFC PDF (1.2 MB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3758701 PDF (508.2 KB)
Declarations of conformity
Declarations of conformity
EU Declaration of Conformity 3365628 PDF (583.9 KB)
CAD data
CAD data
OTi DALI 10 700 NFC built in IGS ZIP (1.4 MB)
CAD data
CAD data
OTi DALI 10 700 NFC built in STEP ZIP (1.6 MB)
CAD data
CAD data
OTi DALI 10 700 NFC independent IGS ZIP (3.7 MB)
CAD data
CAD data
OTi DALI 10 700 NFC independent STEP ZIP (4.1 MB)
CAD data
CAD data
OTI DALI 10 NFC IGS 140120 ZIP (491.6 KB)
CAD data
CAD data
OTI DALI 10 NFC STEP 140120 ZIP (462.1 KB)
CAD Data 2-dim
CAD Data 2-dim
OTI DALI 10 NFC CAD2PDF 140120 ZIP (86.1 KB)
CAD data 3-dim
CAD data 3-dim
OTI DALI 10 NFC CAD3PDF 140120 ZIP (76.6 KB)
CAD data PDF
CAD data PDF
OTi DALI 10 700 NFC built in PDF PDF (1.3 MB)
CAD data PDF
CAD data PDF
OTi DALI 10 700 NFC independent PDF PDF (4.6 MB)
Advertisements
Advertisements
538835_Poster OPTOTRONIC LED drivers (EN) PDF (3.0 MB)
Product code Packaging unit
Piece / unit		 Dimensions in h x w x l Gross weight Volume
4052899562639 UNV
1
4052899562646 VS
20		 165mm x 258mm x 71mm 1120.00g 3.02dm³
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Very high efficiency
  • Protection of the system thanks to thermal management and Smart Control
  • High-quality dimming of 1…100 % by amplitude dimming
  • Easy and fast output current setting via NFC
Versatile scope of application due to OSRAM DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to EN 55015:2007+A1:2007/CDN
  • Line harmonics according to EN 61000-3-2
  • Immunity according to EN 61547
  • Lifetime: up to 100,000 h
  • Type of protection: IP20