Product description | Nominal voltage | Mains frequency | Input voltage AC | Total harmonic distortion | Power factor λ |
---|---|---|---|---|---|
OTi DALI 15/220 240/1A0 Box | 220 240V | 0/50/60Hz | 198 264V | < 10% | 0.95 |
OTi DALI 50/220 240/1A4 Box | 220 240V | 0/50/60Hz | 198 264V | < 10% | > 0.95 |
OTi DALI 25/220 240/700 Box | 220 240V | 0/50/60Hz | 198 264V | < 20% | > 0.95 |
OTi DALI 35/220 240/1A0 Box | 220 240V | 0/50/60Hz | 198 264V | < 20% | > 0.95 |
Nominal voltage | 220 240 V |
Mains frequency | 0/50/60 Hz |
Input voltage AC |
198
264 V
|
Total harmonic distortion |
< 10 %
|
Power factor λ | 0.95 |
ECG efficiency |
88 %
|
Device power loss | 2.4 W |
Inrush current |
5 A
|
Max. ECG no. on circuit breaker 10 A (B) | 82 |
Max. ECG no. on circuit breaker 16 A (B) | 130 |
Max. ECG no. on circuit breaker 25 A (B) | - |
Surge capability (L/N-Ground) | 2 kV |
Surge capability (L-N) | 1 kV |
Nominal output voltage |
7.5
54 V
|
U-OUT (working voltage) | 60 V |
Nominal output current |
150
1050 mA
|
Output current tolerance | ±3 % |
Output ripple current (100 Hz) | < 2 % |
Nominal output power |
18 W
|
Galvanic isolation | SELV |
Galvanic isolation primary/secondary | 3.75 kV |
Length | 119.0 mm |
Width | 53.0 mm |
Height | 31.0 mm |
Mounting hole spacing, length | - mm |
Mounting hole spacing, width | - mm |
Cable cross-section, input side |
0.2
1.5 mm²
|
Cable cross-section, output side |
0.2
1.5 mm²
|
Product weight | 116.00 g |
Wire preparation length, input side | 8.0 9.0 mm |
Wire preparation length, output side | 8.0 9.0 mm |
Ambient temperature range | -20 +50 °C |
Maximum temperature at tc test point |
80 °C
|
Max.housing temperature in case of fault | 110 °C |
Permitted rel. humidity during operation |
5
85 %
|
ECG lifetime |
50000 / 100000 h
|
Encapsulated | No |
Dimmable | Yes |
Overheating protection | Automatic reversible |
Overload protection | Automatic reversible |
Short-circuit protection | Automatic reversible |
No-load proof | Yes |
Max. cable length to lamp/LED module | 2.0 m |
Suitable for fixtures with prot. class | I / II |
Type of connection, output side | Push terminal |
Approval marks – approval | ENEC 10 / VDE / EMC / EL / CE / DALI-2 |
Standards | Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1 |
Type of protection | IP20 |
Temperature range at storage | -40 +85 °C |
Product code | Packaging unit Piece / unit |
Gross weight | Volume | |
---|---|---|---|---|
4062172058414 | FS 1 |
386.00g | ||
4062172058421 | VS 10 |
188mm x 138mm x 141mm | 1428.00g | 3.66dm³ |