Professional
Country

LED DRIVER DALI PERFORMANCE

Choose your product version

Overview LED DRIVER DALI PERFORMANCE

Product description Length Width Height Product weight Prewired
DR DALI-PFM -26/220-240/700 90.0mm 44.0mm 32.0mm 115.00g No
DR DALI-PFM -44/220-240/1050 90.0mm 44.0mm 32.0mm 180.00g No
DR DALI-PFM -60/220-240/1A4 100.0mm 76.0mm 32.0mm 327.00g No
 

DR DALI-PFM -26/220-240/700

Product benefits
  • Low flickering enables high light quality as well as good visual comfort
  • Push DIM application for easy control
  • High-quality dimming of 1…100 %
  • Suitable for emergency lighting
  • 5 years guarantee

Product details

Electrical data

Nominal voltage 220…240 V
Mains frequency 50/60 Hz
Input voltage AC
198…264 V
Total harmonic distortion
< 10 %
Power factor λ
0.95
ECG efficiency
86 %
Device power loss
7.0 W
Power loss in stand-by mode <0.5 W
Inrush current
30 A
Max. ECG no. on circuit breaker 10 A (B) 13
Max. ECG no. on circuit breaker 16 A (B) 21
Max. ECG no. on circuit breaker 25 A (B) 34
Surge capability (L/N-Ground) 2 kV
Surge capability (L-N) 1 kV
Nominal output voltage
9…52 V
U-OUT (working voltage) 60 V
Nominal output current
700 mA
Output current tolerance ±5 %
Output ripple current (100 Hz) +/- 5 %
Nominal output power
26 W
Galvanic isolation SELV
Galvanic isolation primary/secondary 3 kV

Dimensions & weight

Length 90.0 mm
Width 44.0 mm
Height 32.0 mm
Mounting hole spacing, length 90 mm
Mounting hole spacing, width 35.0 mm
Cable cross-section, input side 0.5…1.0 mm²
Cable cross-section, output side 0.5…1.0 mm²
Product weight 115.00 g
Wire preparation length, input side 6…7 mm
Wire preparation length, output side 6…7 mm
Prewired No

Colors & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 110 °C
Permitted rel. humidity during operation
5…85 %

Lifespan

ECG lifetime
50000 h

Additional product data

Encapsulated Yes

Capabilities

Dimmable Yes
Dimming interface DALI-2
Dimming range 1…100 %
Dimming method DALI
Overheating protection Yes
Overload protection Yes
Short-circuit protection Yes
No-load proof Yes
Max. cable length to lamp/LED module 2.0 m
Suitable for fixtures with prot. class I / II
Type of connection, output side Push terminal
Suitable for no-load mode operation Yes

Certificates & standards

Approval marks – approval CE / CB / ENEC
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Protection class I
Type of protection IP00

Logistical data

Temperature range at storage -40…+85 °C
DR AY ZB+DALI CLAMP DUO 4058075483125
Product code Packaging unit
Piece / unit
Dimensions in h x w x l Gross weight Volume
4058075421882 FS
1
4058075421899 VS
10
311mm x 154mm x 116mm 1584.00g 5.56dm³
EAN STK number
4058075421882 4031433
Product benefits
  • Low flickering enables high light quality as well as good visual comfort
  • Push DIM application for easy control
  • High-quality dimming of 1…100 %
  • Suitable for emergency lighting
  • 5 years guarantee
Areas of application
  • Suitable for indoor SELV installations
  • Suitable for use in emergency lighting systems (DC capable)
  • Installation via Cable Clamp Kit possible (depending on version of product)
  • Linear lighting for office, education, storage areas and retail
Product features
  • 1 channel DALI-2 certified LED driver
  • Supply voltage: 220…240 V
  • Operated with Safety extra-low voltage (SELV): < 60 V
  • Available with output current range: up to 1,400 mA
  • Type of installation: independent and built-in

References / Links
For Guarantee see www.ledvance.com/guarantee