1.3.1. HOW CAN I FIND OUT IF MY Professional Smart for Residential ZIGBEE PRODUCT IS USING ZIGBEE 3.0 OR ZIGBEE LIGHT LINK, EVEN IF I LOST THE PACKAGING?
Professional Smart for Residential Zigbee 3.0 products are distinguishable from Professional Smart for Residential Zigbee Light Link products by the QR code on the products itself. If your Professional Smart for Residential Zigbee product has a QR-code printed on, then it is a Zigbee 3.0 product.
To minimize confusion, please be aware that our Professional Smart for Residential Bluetooth products, which are not compatible with Zigbee or Professional Smart for Residential Zigbee products due to the use of different technologies, also have a QR code on them. These Professional Smart for Residential Bluetooth products can be distinguished from Professional Smart for Residential Zigbee products by the packaging (Bluetooth label or by the imprint “Works with Apple HomeKit”) and by the additional Bluetooth identification number (eight-digit numeric code) printed on the product.
1.3.2. CAN I UPDATE THE FIRMWARE OF MY Professional Smart for Residential ZIGBEE PRODUCTS FROM ZIGBEE LIGHT LINK TO ZIGBEE 3.0?
No, it is not possible to update Professional Smart for Residential Zigbee products from Zigbee Light Link to Zigbee 3.0 or vice versa. This is because different hardware had to be used for the two Zigbee versions, which contributes to an increased security level with the latest Zigbee version Zigbee 3.0. Nevertheless, our Professional Smart for Residential Zigbee 3.0 products are fully backwards compatible to all previous Zigbee standards.
1.3.3. CAN I CONTROL MY Professional Smart for Residential ZIGBEE PRODUCTS DIRECTLY AND SOLELY WITH MY SMARTPHONE?
No, beside your smartphone you will need a compatible control unit which is able to communicate on the Zigbee standard to control your Professional Smart for Residential Zigbee products. This might be a compatible, Zigbee enabled smart home system or a compatible voice assistant with a built-in Zigbee hub. You will have the best user experience by controlling our Professional Smart for Residential Zigbee products with one of our official partner systems. For more information on our partner smart home systems see the Professional Smart for Residential website or the FAQ section 2 (Professional Smart for Residential and Partners).
All of our Professional Smart for Residential Zigbee lamps are plug & play and don’t need to be assembled.
Yes. It is possible to extend the Professional Smart for Residential Gardenpole Multicolor or the Professional Smart for Residential Gardenpole Mini Multicolor with up to two Professional Smart for Residential Gardenpole Extension sets or Professional Smart for Residential Gardenpole Mini Extension sets. For the Professional Smart for Residential Gardenpole Multicolor this leads to a maximum amount of 11 poles with a total set length of 23 m (incl. cables and power supply connection). For the Professional Smart for Residential Gardenpole Mini Multicolor this leads to a maximum amount of 11 mini poles with a total set length of 11 m (incl. cables and power supply connection).
Work through the following checklist to exclude common error sources. If you still have not been able to resolve the error yourself, you can contact our support team directly using the following link .
a) Check if all parts are properly mounted:- Professional Smart for Residential Outdoor Flex Multicolor
- Professional Smart for Residential Gardenpole Multicolor- Professional Smart for Residential Gardenpole Multicolor Extension
- Professional Smart for Residential Gardenpole Mini Multicolor- Professional Smart for Residential Gardenpole Mini Multicolor Extension
2. The following Professional Smart for Residential Zigbee luminaires have specific marks on the ends of their connectable parts, which indicate the right direction of connection between two elements. Make sure that the marks between two connected parts are always matching each other:
- Professional Smart for Residential Flex 3P Multicolor,
- Professional Smart for Residential Flex Extension Multicolor
3. The following Professional Smart for Residential Zigbee luminaires need to be wired manually for power supply. Make sure that the different wires are connected to their correct counterpart and that the wires are fully stuck in the power connection clamp. Note that the wiring of these luminaires should be done by an electrician:
- Professional Smart for Residential Outdoor Lantern Multicolor
- Professional Smart for Residential Outdoor Lantern Modern Wall Multicolor
- Professional Smart for Residential Ceiling Tunable White
- Professional Smart for Residential Tibea Ceiling
- Professional Smart for Residential Tibea Pendant
- Professional Smart for Residential Tibea Mini
b) Checking the power supply:
Please make sure that the Professional Smart for Residential Zigbee luminaire in question has a working power supply and is switched on. The luminaire can only receive commands when the electricity/light switch is turned on.
c) Restarting:
Please disconnect the Professional Smart for Residential Zigbee luminaire in question from its power supply for 30 seconds. After the Professional Smart for Residential Zigbee luminaire is reconnected to the power supply, it may take up to three minutes till the connection between your system and the Professional Smart for Residential Zigbee luminaire is re-established. If the luminaire is still not connected please restart your smart home system, the app of your smart home system your smartphone or tablet.
d) Reducing of interference factors:
There are various external circumstances that could disrupt the functionality of the Professional Smart for Residential product. Please try the following to reduce them:
- Reduce the distance between the Professional Smart for Residential Zigbee product, the smartphone or tablet where the app of the smart home system is installed and the control unit or the next Zigbee network member of your smart home system.
- Turn off devices that produce additional traffic on the 2.4-GHz-frequency in close proximity to the Professional Smart for Residential products and the smart home system.
- Surfaces that are made of electrically conductive materials might have a negative influence on the Zigbee signal. Please try to remove them. Obstacles like walls may also impair the range.
e) Checking Internet and WiFi connections:
When using a smart home system, please make sure it has a working connection to the home network/WiFi router as well as to the Internet. To do this, you have to open the smart home app, make sure that the smartphone or other compatible device you are using is connected to the same WiFi home network as the smart home system. If this is not the case, please restart the WiFi router and unplug the smart home system from the socket for at least ten seconds and then plug it back in again.
f) Re-add to system:
It can help to reset the Professional Smart for Residential Zigbee luminaire in question and then reintegrate it in the smart home system.
Please try first to disconnect the Professional Smart for Residential Zigbee luminaire from the smart home system using the respective app. If that didn’t work, you can also reset Professional Smart for Residential products without using the App, see question 3.3.8 (HOW CAN Professional Smart for Residential ZIGBEE LUMINAIRES BE RESET?).
You can then integrate the Professional Smart for Residential Zigbee luminaire into the smart home system again.
g) E-mail support:
If your Professional Smart for Residential Zigbee luminaire is still not working as expected, please contact our support team directly. Our support team will be pleased to provide further assistance.
First check if your Professional Smart for Residential Zigbee product is able to show the color you selected. Products labelled “Multicolor” can show RGBW colors, products labelled “Tunable White” can show different types of white color and products labelled as dimmable can only dim the brightness up and down. If your Professional Smart for Residential luminaire should be able to show colors but still doesn’t show the right color, then this may be caused by a wrong assembly of the connectors between your Professional Smart for Residential Zigbee luminaire and the control unit. For this please check out the question 3.4.1 (WHAT CAN I DO IF A Professional Smart for Residential ZIGBEE LUMINAIRE IS NOT WORKING?).
For additional help, please check out the FAQ section 2 (Professional Smart for Residential and Partners). If your question is still not answered, please contact our support team directly. Our support team will be pleased to provide further assistance.
Professional Smart for Residential Zigbee plugs can be updated using free-of-charge firmware updates in order, for example, to improve usability or add new functions or features. To install new firmware, your Professional Smart for Residential Zigbee plugs need to be connected to a partner smart home system that is authorized to install our firmware. For firmware updates currently authorized systems are OSRAM LIGHTIFY, Samsung SmartThings, Schwaiger Home4You and the Qivicon/Telekom Magenta SmartHome system. Please refer to the FAQ section 2 (Professional Smart for Residential and Partners) to see if the smart home system you are using is one of our partner systems and supports firmware updates or not.
Yes. Professional Smart for Residential Zigbee plugs can also be controlled directly with the Professional Smart for Residential Switch or Switch Mini which support Touchlink. For how to use Touchlink see question 5.2.2. (HOW CAN I USE THE Professional Smart for Residential ZIGBEE SWITCH TO CONTROL OTHER Professional Smart for Residential ZIGBEE PRODUCTS WITHOUT THE USE OF A SMART HOME SYSTEM (VIA TOUCHLINK)).
Our Professional Smart for Residential Zigbee plug is a plug & play solution. To pair it to a compatible smart home system of your choice simply start the pairing process of your smart home system and then connect the Professional Smart for Residential Zigbee plug to the power grid. In around 30 seconds it should appear in your system. If this fails, please see question 4.4.1. (WHAT CAN I DO IF A Professional Smart for Residential ZIGBEE PLUG WON’T PAIR TO MY SMART HOME SYSTEM?) or 4.4.2. (WHAT CAN I DO IF A Professional Smart for Residential ZIGBEE PLUG IS NOT WORKING?).
For detailed information on how to pair them with the different systems please refer to the respective manufacturer support or see the FAQ section 2 (Professional Smart for Residential and Partners).
For safety reasons, our Professional Smart for Residential Zigbee plugs will always be turned off when connected to the power grid.
You will find an overview of the Professional Smart for Residential Zigbee products here.
For safety reasons, our Professional Smart for Residential Zigbee plugs will always be turned off when connected to the power grid. This means that as soon as the power is restored your Professional Smart for Residential Zigbee plug will be off even when it was previously turned on.
Yes. The Professional Smart for Residential Zigbee plugs are equipped with a manual power button. The power button has a status LED which indicates the current status of the plug. For our Professional Smart for Residential Plug the button is located on the front of the product and for our Professional Smart for Residential Outdoor Plug the button is located directly next to the socket.
Individual Professional Smart for Residential Zigbee plugs can be reset to factory setting (delivery status) and reconfigured without the entire smart home system having to be reinstalled. Just delete the individual plug in your smart home system. You can also manually reset a Professional Smart for Residential Zigbee Plug. Press and hold the power button on the plug for at least ten seconds until you hear a clicking noise or see the status LED flashing several times.
Our Professional Smart for Residential Zigbee plug is a plug & play solution. Normally it should be possible to pair the Professional Smart for Residential Zigbee plug by simply starting the pairing process of your compatible smart home system and connecting the Professional Smart for Residential Zigbee plug to the power grid.
If this didn’t work, follow these steps:
1. Start the pairing process of your smart home system. Your system should open a pairing window in which Zigbee devices are able to pair.
2. Connect the Professional Smart for Residential Zigbee plug to the power grid.
3. Press and hold the power button on the plug for at least ten seconds until you hear a clicking noise or see the status LED flashing several times.
4. In around 30 seconds the Professional Smart for Residential Zigbee plug should appear in your system.
a) Checking the power supply:
Please make sure that the Professional Smart for Residential Zigbee plug in question has a working power supply. The plug can only receive commands when the electricity is turned on.
b) Restarting:
Please disconnect the v Zigbee plug in question from its power supply for 30 seconds. After the Professional Smart for Residential Zigbee plug is reconnected to the power supply, it may take up to three minutes till the connection between your system and the Professional Smart for Residential Zigbee plug is re-established. If the Professional Smart for Residential Zigbee lamp is still not connected please restart your smart home system, the app of your smart home system and your smartphone or tablet.
c) Reducing of interference factors:
There are various external circumstances that could disrupt the functionality of the Professional Smart for Residential product. Please try the following to reduce them:
- Reduce the distance between the Professional Smart for Residential Zigbee product, the smartphone or tablet where the app of the smart home system is installed and the control unit or the next Zigbee network member of your smart home system.
- Turn off devices that produce additional traffic on the 2.4-GHz-frequency in close proximity to the Professional Smart for Residential products and the smart home system.
- Surfaces that are made of electrically conductive materials might have a negative influence on the Zigbee signal. Please try to remove them. Obstacles like walls may also impair the range.
d) Checking Internet and WiFi connections:
When using a smart home system, please make sure it has a working connection to the home network/WiFi router as well as to the Internet. To do this, you have to open the smart home app, make sure that the smartphone or other compatible device you are using is connected to the same WiFi home network as the smart home system. If this is not the case, please restart the WiFi router and unplug the smart home system from the socket for at least ten seconds and then plug it back in again.
e) Re-add to system:
It can sometimes help to reset the Professional Smart for Residential Zigbee plug in question and then reintegrate it in the smart home system.
Please try first to disconnect the Professional Smart for Residential Zigbee plug from the smart home system using the respective app. If that didn’t work, you can also reset Professional Smart for Residential products without using the App, see question 4.3.6. (HOW CAN Professional Smart for Residential ZIGBEE PLUGS BE RESET?).
You can then integrate the Professional Smart for Residential Zigbee plug into the smart home system again.
f) E-mail support:
If your Professional Smart for Residential Zigbee plug is still not working as expected, please contact our support team directly. Our support team will be pleased to provide further assistance.
For some electrical devices connected to a Professional Smart for Residential Zigbee plug, there may be a problem where status or other LEDs of the device appear to glow after the Professional Smart for Residential Zigbee plug is turned off. In most cases, this can easily be fixed by rotating the Professional Smart for Residential Zigbee plug 180 degrees before plugging it into the socket again.
For additional help, please check out the FAQ section 2 (Professional Smart for Residential and Partners). If your question is still not answered, please contact our support team directly. Our support team will be pleased to provide further assistance.
Our Professional Smart for Residential Zigbee Switches have the possibility to be used without any additional smart home system. Via the Touchlink function you can connect up to ten Professional Smart for Residential Zigbee lamps, luminaires, or plugs to one Professional Smart for Residential Zigbee Switch.
For the full functionality of our Professional Smart for Residential Zigbee Switches you need an OSRAM LIGHTIFY Gateway which requires an internet connection for installation purposes and an Android or iOS device with the LIGHTIFY app.
All of our Professional Smart for Residential Zigbee switches are plug & play and don’t need to be assembled.
Yes. Our Professional Smart for Residential Zigbee switches come with easy and flexible mounting solutions, which allow to use the switch as a remote control and/or as a wall switch:
a) Installation of the Professional Smart for Residential Switch:
The Professional Smart for Residential Switch bundle contains the switch itself (incl. batteries), a wall socket, a metal back plate and two options to mount the metal back plate. Start by mounting the metal back plate with the flat side against the wall. You can do this either with the enclosed double-sided adhesive pad or with two enclosed screws which must be mounted in the wall with dowels. Then you can push the wall socket with the four pins in the metal back plate. Now the Professional Smart for Residential Zigbee switch can be attached on the wall socket with its magnetic backside. For further illustrations of the mounting process see the installation guide enclosed in the packaging.
b) Installation of the Professional Smart for Residential Switch Mini:
The Professional Smart for Residential Switch Mini can be mounted on the wall with an oval pin that has to be installed with a screw and a dowel. All necessary parts for mounting are included in the packaging. For further illustrations of the mounting process see the installation guide enclosed in the packaging.
Professional Smart for Residential Zigbee switches can be updated using free-of-charge firmware updates in order to improve usability or add new functions or features. To install new firmware, your Professional Smart for Residential Zigbee switches need to be connected to an OSRAM LIGHTIFY system.
The Professional Smart for Residential Zigbee switches have the possibility to send out Zigbee commands to a group of compatible Professional Smart for Residential Zigbee products without the need of any configuration in a smart home system. To do this the Professional Smart for Residential Zigbee switch needs to be paired with the Professional Smart for Residential Zigbee product via a feature called Touchlink:
a) Use Touchlink with Professional Smart for Residential Switch:
1. Plug in the Professional Smart for Residential Zigbee product you want to connect to the Professional Smart for Residential Switch and wait 20 seconds. Only one product is able to pair within one Touchlink cycle.
2. Hold the Professional Smart for Residential Switch 1-5 cm away from the respective Professional Smart for Residential Zigbee product.
Please be aware that some Professional Smart for Residential Zigbee luminaires have a separate control unit between the power supply and the luminaire itself. For Touchlink pairing hold the Professional Smart for Residential Switch within 1-5 cm distance to the control unit.
3. Press and hold the left and right lower buttons for up to 10 seconds. The status LED of the Professional Smart for Residential Switch will blink blue several times. Release the buttons immediately when the status LED stops blinking and constantly shines blue.
4. The pairing was successful if the status LED blinks blue again and the corresponding Professional Smart for Residential Zigbee product blinks once. When the pairing failed the status LED blinks red, if so, please start over with step 2.
b) Use Touchlink with Professional Smart for Residential Switch Mini:
1. Plug in the Professional Smart for Residential Zigbee product you want to connect to the Professional Smart for Residential Switch Mini and wait 20 seconds. Only one product is able to pair within one Touchlink cycle.
2. Hold the Professional Smart for Residential Switch Mini 1-5 cm away from the respective Professional Smart for Residential Zigbee product.
Please be aware that some Professional Smart for Residential Zigbee luminaires have a separate control unit between the power supply and the luminaire itself. For Touchlink pairing hold the Professional Smart for Residential Switch within 1-5 cm distance to the control unit.
3. Press and hold the lower and the upper button for up to 10 seconds. The status LED of the Professional Smart for Residential Switch Mini will blink blue several times. Release the buttons immediately when the status LED stops blinking and constantly shines blue.
4. The pairing was successful if the status LED blinks blue again and the corresponding Professional Smart for Residential Zigbee product blinks once. When the pairing failed the status LED blinks red, if so, please start over with step 2.
You can control up to 10 compatible Professional Smart for Residential Zigbee products with one Professional Smart for Residential Zigbee Switch.
The Professional Smart for Residential Zigbee switches must be in pairing mode and the pairing window of the compatible smart home system must be open to connect Professional Smart for Residential Switches:
a) Setting a Professional Smart for Residential Switch into pairing mode:
1. Make sure the battery of your Professional Smart for Residential Switch is properly inserted. You might have to remove the battery protection strips.
2. Simultaneously press and hold the lower left and upper right button. The status LED should continuously blink blue while holding the buttons.
3. Release the buttons after 3 seconds. The status LED should give a short sequence of blue flashes and then stop blinking.
4. Within 30 seconds your Professional Smart for Residential Switch should appear in your smart home system.
b) Setting a Professional Smart for Residential Switch Mini into pairing mode:
1. Make sure the battery of your Professional Smart for Residential Switch Mini is properly inserted. You might have to remove the battery protection strips.
2. Simultaneously press and hold the middle and upper button. The status LED should continuously blink green while holding the buttons.
3. Release the buttons after 3 seconds. The status LED should give a short sequence of green flashes and then stop blinking.
4. Within 30 seconds your Professional Smart for Residential Switch Mini should appear in your smart home system.
For detailed information on how to pair them with the different systems please refer to the respective manufacturer support or see the FAQ section 2 Professional Smart for Residential and Partners).
a) Default key assignment of the Professional Smart for Residential Switch:
- Lower left button: ‘short press’ -> turn off, ‘long press’ -> dim down
- Lower right button: ‘short press’ -> tune to warmer light, ‘long press’ -> color loop
- Upper left button: ‘short press’ -> turn on, ‘long press’ -> dim up
- Upper right button: ‘short press’ -> tune to colder light, ‘long press’ -> color loop
b) Default key assignment of the Professional Smart for Residential Switch Mini:
- Upper button: ‘short press’ -> turn on, ‘long press’ -> dim up
- Middle button: ‘short press’ -> turn to 2700k warm white, ‘long press’ -> color loop
- Lower button: ‘short press’ -> turn off, ‘long press’ -> dim downYes, the default key assignment can be configured by using OSRAM LIGHTIFY system. It is possible to store up to 8 different commands in one Professional Smart for Residential Switch and up to 6 different commands in one SMART+ Switch Mini. For further information regarding compatibility see the FAQ section 2 (Professional Smart for Residential and Partners).
The replaceable Professional Smart for Residential Zigbee switch battery has a lifetime of up to three years for standard use of approximately 25 clicks per day. The existence of other wireless networks (e.g. WiFi, etc.) and a longer distance to the controlled products can reduce the battery performance.
Our Professional Smart for Residential Zigbee switches use the wireless standard Zigbee, which has a similar wireless frequency to WiFi. This means that radio waves can penetrate walls to a certain extent. Depending on the construction material of a building and the existence of obstacles like walls, the signal may be impaired in certain areas. Moreover, the signal cannot penetrate surfaces that are made of electrically conductive materials.
As long as the Zigbee signal is not impaired, it can reach a range of up to 30 meters between two Professional Smart for Residential Zigbee products. In addition, the Zigbee signal is repeated by every Professional Smart for Residential Zigbee product that is connected to the power grid.
Individual Professional Smart for Residential Zigbee switches can be reset to factory setting (delivery status) and reconfigured without the entire smart home system having to be reinstalled:
a) Resetting the Professional Smart for Residential Switch:
Press and hold the upper left and lower right button for up to 10 seconds. During reset, the status led flashes green slowly several times. After a successful reset, the lamp flashes green quickly for a few seconds.
b) Resetting a Professional Smart for Residential Switch Mini:
Press and hold the middle and lower button for up to 10 seconds. During reset, the status led flashes green slowly several times. After a successful reset, the lamp flashes green quickly for a few seconds.
Work through the following checklist to exclude common error sources. If you still have not been able to resolve the error yourself, you can contact our support team directly using the following link . Our support team will be pleased to provide further assistance:
a) Checking the battery:
Please make sure that the switch in question has a working power supply through his battery. You can test this by starting either the reset or Touchlink process and checking if the status LED is responding.
b) Restarting:
Please take out the battery of the switch for some seconds and put it back in. The reconnection may take up to three minutes.
If the switch is still not connected please restart your smart home system, the app of your smart home system and your smartphone or tablet.
c) Reducing of interference factors:
There are various external circumstances that could disrupt the functionality of the Professional Smart for Residential product. Please try the following to reduce them:
- Reduce the distance between the Professional Smart for Residential Zigbee product, the smartphone or tablet where the app of the smart home system is installed and the control unit or the next Zigbee network member of your smart home system.
- Turn off devices that produce additional traffic on the 2.4-GHz-frequency in close proximity to the Professional Smart for Residential products and the smart home system.
- Surfaces that are made of electrically conductive materials might have a negative influence on the Zigbee signal. Please try to remove them.
d) Checking Internet and WiFi connections:
When using a smart home system, please make sure it has a working connection to the home network/WiFi router as well as to the Internet. To do this, you have to open the smart home app, make sure that the smartphone or other compatible device you are using is connected to the same WiFi home network as the smart home system. If this is not the case, please restart the WiFi router and unplug the smart home system from the socket for at least ten seconds and then plug it back in again.
e) Re-add to system:
It can help to reset the Professional Smart for Residential Zigbee switch in question and then reintegrate it in the smart home system.
Please try first to disconnect the Professional Smart for Residential Zigbee switch from the smart home system using the respective app. If that didn’t work, you can also reset Professional Smart for Residential products without using the App, see question 5.3.6. (HOW CAN Professional Smart for Residential ZIGBEE SWITCHES BE RESET?).
You can then integrate the Professional Smart for Residential Zigbee switch into the smart home system again.
f) E-mail support:
If a Professional Smart for Residential Zigbee switch is still not working as expected, please contact our support team directly. Our support team will be pleased to provide further assistance.
For additional help, please check out the FAQ section 2 (Professional Smart for Residential and Partners). If your question is still not answered, please contact our support team directly. Our support team will be pleased to provide further assistance.
You need a smart home system that is compatible with our Professional Smart for Residential Zigbee motion sensor. These smart home systems usually require a smart home gateway or bridge, an internet connection for installation purposes and an Android or iOS device with the respective smart home app. Our Professional Smart for Residential Motion Sensor is currently compatible with:
• Amazon Echo Plus and Echo Show (2. Gen)
• OSRAM LIGHTIFY Gateway
• Qivicon/Telecom HomeBase
For more information about our partner smart home systems see the Professional Smart for Residential website or the FAQ section 2 (Professional Smart for Residential and Partners).
All of our Professional Smart for Residential Zigbee motion sensors are plug & play and don’t need to be assembled.
The Professional Smart for Residential Zigbee motion sensor offers two installation options. You can either install it with the enclosed screws or tape on flat surfaces or in between two walls that are at a 90 degree angle to each other. Note that installing the motion sensor on inclined surfaces will influence the detection field of the sensor. Further information on the installation process can be found in the installation guide enclosed in the packaging.
Professional Smart for Residential Zigbee motion sensors can be updated using free-of-charge firmware updates in order, for example, to improve usability or add new functions or features. To install new firmware, your Professional Smart for Residential Zigbee motion sensors need to be connected to one of the above mentioned partner smart home systems that is authorized to install our firmware. For firmware updates currently authorized systems are OSRAM LIGHTIFY, Samsung SmartThings and the Qivicon/Telekom Magenta SmartHome system. Please refer to the FAQ section 2 (Professional Smart for Residential and Partners) to see if the smart home system you are using is one of our partner systems and supports firmware updates or not.
In order to function properly the Professional Smart for Residential Zigbee motion sensor needs to be configured in a compatible smart home system. Therefore, it is not possible to use Professional Smart for Residential Zigbee motion sensors without a smartphone or tablet and a smart home system. For further information about compatible smart home systems please see the FAQ section 2 (Professional Smart for Residential and Partners).
The Professional Smart for Residential Zigbee motion sensor must be in pairing mode to connect it to a compatible system. The easiest way to set a Professional Smart for Residential motion sensor into pairing mode is to make sure that it is reset and then simply remove and reinsert the battery. If this fails to work, please have a look at question 6.4.1 (WHAT CAN I DO IF A Professional Smart for Residential ZIGBEE MOTION SENSOR WON’T PAIR TO MY SMART HOME SYSTEM?) or 6.4.2. (WHAT CAN I DO IF A Professional Smart for Residential ZIGBEE MOTION SENSOR IS NOT WORKING?). For detailed information on how to pair them with the different systems please refer to the respective manufacturer support or see the FAQ section 2 (Professional Smart for Residential and Partners).
You will find an overview of the Professional Smart for Residential products here.
The detection range of the Professional Smart for Residential Zigbee motion sensor can reach up to 4,5m. The field of detection is limited by a 100 degree detection angle which can be adjusted through the installation process.
The Professional Smart for Residential Zigbee motion sensors are powered by batteries and do not need a connection to the power grid.
Our Professional Smart for Residential Zigbee motion sensors use the wireless standard Zigbee, which has a similar wireless frequency to WiFi. This means that radio waves can penetrate walls to a certain extent. Depending on the construction material of a building and the existence of obstacles like walls, the signal may be impaired in certain areas. Moreover, the signal cannot penetrate surfaces that are made of electrically conductive materials.
As long as the Zigbee signal is not impaired, it can reach a range of up to 30 meters between two Professional Smart for Residential Zigbee products. In addition, the Zigbee signal is repeated by every Professional Smart for Residential Zigbee product that is connected to the power grid and in the same network.
Individual Professional Smart for Residential Zigbee motion sensors can be reset to factory setting (delivery status) and reconfigured without the entire smart home system having to be reinstalled. Just delete the individual Motion Sensor in your smart home system. You can also manually reset it. To manually reset a Professional Smart for Residential Zigbee Motion sensor, press and hold the grey button on the sensor for at least ten seconds.
6.4.1. WHAT CAN I DO IF A Professional Smart for Residential ZIGBEE MOTION SENSOR WON’T PAIR TO MY SMART HOME SYSTEM?
Our Professional Smart for Residential Zigbee motion sensor is a plug & play solution. Normally it should be possible to pair the Professional Smart for Residential Zigbee motion sensor by simply starting the pairing process of your smart home system and plugging the Professional Smart for Residential Zigbee motion sensors battery in.
If this didn’t work, follow these steps:
1. Start the pairing process of your smart home system. Your system should open a pairing window in which Zigbee devices are able to pair.
2. Remove the battery of your Professional Smart for Residential Zigbee motion sensor.
3. Press and hold the grey button for about 4 Seconds.
4. Insert the battery and release the grey button within 1 seconds. The status LED should be flashing blue several times.
5. In around 30 seconds the Professional Smart for Residential Zigbee motion sensor should appear in your system.
Work through the following checklist to exclude common error sources. If you still have not been able to resolve the error yourself, you can contact our support team directly using the following link . Our support team will be pleased to provide further assistance:
a) Checking the power supply:
Please make sure that the Professional Smart for Residential Zigbee motion sensor in question has a working power supply. Check that the battery is inserted correctly and still has plenty of power left. You see if the sensor has power if it blinks green when motion is detected.
b) Restarting:
Please remove the battery of your Professional Smart for Residential Zigbee motion sensor. Wait for a few seconds and then put the battery back in.
c) Reducing of interference factors:
There are various external circumstances that could disrupt the functionality of the Professional Smart for Residential product. Please try the following to reduce them:
- Reduce the distance between the Professional Smart for Residential Zigbee product, the smartphone or tablet where the app of the smart home system is installed and the control unit or the next Zigbee network member of your smart home system.
- Turn off devices that produce additional traffic on the 2.4-GHz-frequency in close proximity to the Professional Smart for Residential products and the smart home system.
- Surfaces that are made of electrically conductive materials might have a negative influence on the Zigbee signal. Please try to remove them.
d) Checking Internet and WiFi connections:
When using a smart home system, please make sure it has a working connection to the home network/WiFi router as well as to the Internet. To do this, you have to open the smart home app, make sure that the smartphone or other compatible device you are using is connected to the same WiFi home network as the smart home system. If this is not the case, please restart the WiFi router and your smart home system.
e) Re-add to system:
It can sometimes help to reset the Professional Smart for Residential Zigbee motion sensor in question and then reintegrate it in the smart home system.
Please try first to disconnect the Professional Smart for Residential Zigbee motion sensor from the smart home system using the respective app. If that didn’t work, you can also reset Professional Smart for Residential products without using the App, see question 6.3.5. (HOW CAN Professional Smart for Residential ZIGBEE MOTION SENSORS BE RESET?).
You can then integrate the Professional Smart for Residential Zigbee motion sensor into the smart home system again.
f) E-mail support:
If a Professional Smart for Residential Zigbee motion sensor is still not working as expected, please contact our support team directly. Our support team will be pleased to provide further assistance.
A compatible smart gateway or bridge must be working and must be operational to ensure that a motion sensor in the smart system is working properly and reliably. Moreover, the ambient or room temperature must differ by at least 3°C from the body temperature of the person(s) to be detected by the sensor.
For additional help, please check out the FAQ section 2 (Professional Smart for Residential and Partners). If your question is still not answered, please contact our support team directly. Our support team will be pleased to provide further assistance.
Our Professional Smart for Residential Zigbee products are directly compatible without the need of an external or separate gateway to the Amazon Echo Plus and the Amazon Echo Show (2. Gen.). For all other Amazon Alexa devices like the Amazon Echo or the Amazon Echo Dot you will need to rely on third party gateway systems like the ones our partners provide. With them you will be able to connect our Professional Smart for Residential Zigbee products to Amazon Alexa via an Amazon Alexa skill. If you don’t want to rely on a third party system our Professional Smart for Residential Bluetooth portfolio offers you the possibility to connect Professional Smart for Residential products with Amazon Alexa products that don’t have an gateway build in (Amazon Echo, Amazon Echo Dot, …) with the use of the free LEDVANCE Professional Smart for Residential app.
The Professional Smart for Residential Zigbee products must be in pairing mode to connect them. The easiest way to set Professional Smart for Residential Zigbee products into pairing mode is to make sure that they are reset and then simply connect them to electricity. If you power on a Professional Smart for Residential Zigbee product for the first time it is automatically in pairing mode. Before connecting your Professional Smart for Residential Zigbee product to electricity, simply ask Alexa to discover your device. Say, “Discover my devices”, or select ‘Add Device’ in the ‘Devices’ section of the Alexa app. For further information on how to pair devices to an Amazon Alexa device please refer to the respective Amazon help & customer service website.
Professional Smart for Residential Zigbee products can be paired to Amazon Alexa devices without a build in gateway, like the Amazon Echo or Amazon Echo Dot, via a third party system and their Amazon Alexa skill. To pair a Professional Smart for Residential Zigbee product to a third party system please make sure that they are compatible and refer to their support page for detailed information on their pairing process. After a successful pairing to the third party system, please open the Amazon Alexa app and go to the menu item ‘Skills’. There you can find the skill of the chosen third system. Follow the on-screen instructions to complete the linking process. After that ask Alexa to discover your device. Say, “Discover my devices”, or select ‘Add Device’ in the ‘Devices’ section of the Alexa app. For further information on how to pair devices to an Amazon Alexa device please refer to the respective Amazon help & customer service website.
Products | Compatibility Status |
---|---|
Professional Smart for Residential Zigbee Lamps | |
Professional Smart for Residential Zigbee Luminaires | |
Professional Smart for Residential Zigbee Plugs | |
Professional Smart for Residential Zigbee Switches | |
Professional Smart for Residential Zigbee Motion Sensor |
The features offered through the Amazon Alexa system with our Professional Smart for Residential Zigbee products are manifold. You can control the Professional Smart for Residential Zigbee products via the app, voice commands or other controllers like our Professional Smart for Residential Motion Sensors. There are many other possibilities to automate your home, for example with routines or other smart features offered through the Amazon Alexa app. For further information please refer to the Amazon websites and their help & customer service.
Generally speaking, Professional Smart for Residential Zigbee products are compatible to all smart home systems that are using Zigbee. However due to restrictions made by the respective system manufacturer we can only assure compatibility and full functionality of our products with our here mentioned partner systems.
More detailed information on the Alexa smart home system can be found on the respective Amazon help & customer service website.
To use the OSRAM LIGHTIFY system, you will have to buy the OSRAM Lightify gateway. Particularly it is not possible to use the OSRAM LIGHTIFY app with our Professional Smart for Residential Zigbee products without an OSRAM Lightify gateway. For further system requirements please refer to the OSRAM LIGHTIFY support page .
Before you start, make sure that your LIGHTIFY system is properly installed and has the latest updates. To integrate new Professional Smart for Residential Zigbee products, simply press ‘+’ to the top right in the LIGHTIFY App on the ‘Devices’ screen and follow the App's instructions. It can take up to three minutes to set up the connection for Professional Smart for Residential Zigbee products. For detailed information please refer to the OSRAM LIGHTIFY support page.
The Lightify App requires you to scan a QR code for the commissioning of the system. This QR code can only be found on the back of an OSRAM LIGHTIFY gateway. No other QR code, especially no QR code of our Professional Smart for Residential Zigbee or Bluetooth products, will enable you to use the OSRAM Lightify app.
Products | Compatibility Status |
---|---|
Professional Smart for Residential Zigbee Lamps | |
Professional Smart for Residential Zigbee Luminaires | |
Professional Smart for Residential Zigbee Plugs | |
Professional Smart for Residential Zigbee Switches | |
Professional Smart for Residential Zigbee Motion Sensor |
You can connect up to 50 Professional Smart for Residential Zigbee products to the LIGHTIFY system. The maximum number of Professional Smart for Residential Switches per OSRAM LIGHTIFY system is limited to 15 and the maximum number of Professional Smart for Residential Motion Sensors to 10.
Professional Smart for Residential Zigbee products can be updated using free-of-charge firmware updates in order, for example, to improve usability or add new functions or features.
This is how to install a new firmware update:
Please check first that your OSRAM LIGHTIFY gateway is plugged in, connected to the Internet and is lighting green. You can obtain newly available firmware for Professional Smart for Residential products free of charge using the Settings >> System Update function in the LIGHTIFY App. Please always update the LIGHTIFY Gateway first before installing firmware for your lamps and luminaires. It can take a few minutes after the update has been started. The charge bar on the system update screen of the LIGHTIFY App indicates the update status. Please do not switch off either the gateway or the Professional Smart for Residential Zigbee products while the update is in progress.
Generally speaking, Professional Smart for Residential Zigbee products are compatible to all smart home systems that are using Zigbee. However due to restrictions made by the respective system manufacturer we can only assure compatibility and full functionality of our products with our here mentioned partner systems.
More detailed information on the OSRAM LIGHTIFY system can be found on the OSRAM LIGHTIFY support page. .
The Professional Smart for Residential Zigbee products must be in pairing mode to connect them. The easiest way to set Professional Smart for Residential Zigbee products into pairing mode is to make sure that they are reset and then simply connect them to electricity. If you power on a Professional Smart for Residential Zigbee product for the first time it is automatically in pairing mode. Navigate in the Magenta SmartHome app to the pairing screen and select your Professional Smart for Residential Zigbee product through the step-by-step assistant. The assistant should provide you with detailed information on how to pair your product. For further information, please refer to the Telekom Magenta SmartHome support page or the Qivicon community.
Products | Compatibility Status |
---|---|
Professional Smart for Residential Zigbee Lamps | |
Professional Smart for Residential Zigbee Luminaires | |
Professional Smart for Residential Zigbee Plugs | |
Professional Smart for Residential Zigbee Switches | |
Professional Smart for Residential Zigbee Motion Sensor |
The buttons of the Professional Smart for Residential Switch don’t have a default configuration in the Telekom Magenta SmartHome system. Therefore, they need to be configured through the scenes feature of the app. Note that the scenes feature was introduced with the version 5.2 of the Magenta SmartHome app. If you use an older version of the Magenta SmartHome app, please refer to their support page or the Qivicon community.
1. Add your Professional Smart for Residential Switch to the system as described in the Magenta SmartHome app.
2. Navigate to the ‘Scenes’ menu and create a new scene.
3. Select the devices you want to control with one of the four buttons of the Professional Smart for Residential Switch and set them to the desired setting, that should be triggered by a press on the respective button.
4. Connect the Professional Smart for Residential Switch to the scene as described in the Magenta SmartHome app and follow the instructions to select the desired button of the switch.
5. After finishing the creation of the scene, your selected button should be able to trigger the selected scene.
Please note that the long-press functionality of the Professional Smart for Residential Switch, as known from the OSRAM LIGHTIFY system, is not supported by the Telekom Magenta SmartHome system. Therefore, it is only possible to store 4 different commands for the Professional Smart for Residential Switch in the Magenta SmartHome app.
Professional Smart for Residential Zigbee products can be updated using free-of-charge firmware updates in order, for example, to improve usability or add new functions or features. If there is an update in the Magenta SmartHome app available, you will get a notification from the app. The update can be started by selecting the specific notification and following the steps provided by the app. Please do not switch off either the gateway or the Professional Smart for Residential Zigbee products while the update is in progress.
Generally speaking, Professional Smart for Residential Zigbee products are compatible to all smart home systems that are using Zigbee. However due to restrictions made by the respective system manufacturer we can only assure compatibility and full functionality of our products with our here mentioned partner systems.
More detailed information on the Telekom Magenta SmartHome system can be found on their support page or in the Qivicon community.
The Professional Smart for Residential Zigbee products must be in pairing mode to connect them. The easiest way to set Professional Smart for Residential Zigbee products into pairing mode is to make sure that they are reset and then simply connect them to electricity. If you power on a Professional Smart for Residential Zigbee product for the first time it is automatically in pairing mode. To pair a device please follow the instructions provided by the Samsung SmartThings app. It will be necessary to open the pairing window of the SmartThings system and connect your Professional Smart for Residential Zigbee products to electricity. For detailed information, please refer to their support page.
Products | Compatibility Status |
---|---|
Professional Smart for Residential Zigbee Lamps | |
Professional Smart for Residential Zigbee Luminaires | |
Professional Smart for Residential Zigbee Plugs | |
Professional Smart for Residential Zigbee Switches | |
Professional Smart for Residential Zigbee Motion Sensor |
Generally speaking, Professional Smart for Residential Zigbee products are compatible to all smart home systems that are using Zigbee. However due to restrictions made by the respective system manufacturer we can only assure compatibility and full functionality of our products with our here mentioned partner systems.
More detailed information on the Samsung SmartThings system can be found on their support page.
The Professional Smart for Residential Zigbee products must be in pairing mode to connect them. The easiest way to set Professional Smart for Residential Zigbee products into pairing mode is to make sure that they are reset and then simply connect them to electricity. If you power on a Professional Smart for Residential Zigbee product for the first time it is automatically in pairing mode. To pair a device please follow the instructions provided by the SCHWAIGER HOME4YOU app. It will be necessary to open the pairing window of the SCHWAIGER HOME4YOU system and connect your Professional Smart for Residential Zigbee products to electricity. For detailed information, please refer to their support page or their video blog.
Products | Compatibility Status |
---|---|
Professional Smart for Residential Zigbee Lamps | |
Professional Smart for Residential Zigbee Luminaires | |
Professional Smart for Residential Zigbee Plugs | |
Professional Smart for Residential Zigbee Switches | |
Professional Smart for Residential Zigbee Motion Sensor |
Generally speaking, Professional Smart for Residential Zigbee products are compatible to all smart home systems that are using Zigbee. However due to restrictions made by the respective system manufacturer we can only assure compatibility and full functionality of our products with our here mentioned partner systems.
More detailed information on the SCHWAIGER HOME4YOU system can be found on their support page or their video blog. .
Do you have problems with one of our Professional Smart for Residential products? We are happy to help you.