4058075837584

PUSH CONTROL UNIT FLUSH MOUNT DALI-2 TW

PUSH CONTROL UNIT FLUSH MOUNT DALI-2 TW

DALI-2 application controller for installation in standard flush-mounted boxes or DIN rails in switch cabinets. Compatible with all common push button designs, DALI-2 lights and presence/motion sensors with mains switch contact. Manual dimming, switching and saving of light settings, individual adjustment of brightness and color temperature. Dimming range: 1...100%.

Up to 4 control devices can be used in combination to set up several control points. Number of DALI lights per control unit: up to 25. Up-to 100 DALI lights if 4 control units are operated in mains active mode. Combination of mains powered active and DALI powered passive mode possible.

Control unit for one-room applications with up-to 4 access areas. Automatic synchronization between control points.

Nominal wattage: 2.50 W, Nominal voltage: 100…240 V, Mains frequency: 50…60 Hz,  Number of switching cycles: 50000.

Suitable for standard DALI and DALI DT8 (TW) drivers / luminaires, Behavior after power interruption can be set.

Type of installation: Installation in standard flush-mounted boxes or DIN rails in switch cabinets. Easy installation with pre-assembled connection cable. Integrated DALI bus power supply (no mains connection required). Cable cross-section, input side: 0.5…1.5 mm². Wire preparation length input side: 6…7 mm. Cable length of the DALI control cable: up to 300 m.

Dimensions: Length: 45.00 mm, Width: 45.00 mm, Height: 20.00 mm, Product weight: 44.000 g.

Ambient temperature range -25…+50 °C, Maximum temperature at tc test point: 58 °C.

Certificates: CE/UKCA/EAC.

Protection class: II, Protection Type: IP20. Guarantee: 5 years and 7 years in combination with LEDVANCE DALI luminaires. Refer to www.ledvance.com/guarantee for precise conditions.

Product color: White.

Company: LEDVANCE GmbH

Article Number: 4058075837584

Article: PUSH CONTROL UNIT FLUSH MOUNT DALI-2 TW